#if 1
/*
 * hw_codec.c
 *
 *  Created on: 2019-6-4
 *      Author: Windowns
 *  Updated date: July 28 2020 by Leelin
 */
#include "os_config.h"


#include "c_def.h"
#include "debug.h"
#include "oem.h"

#include "regmap.h"

#include "hw_codec.h"
#include "hw_uart.h"
#include "hw_dma.h"
#include "hw_da_pp.h"
#include "hw_pll.h"
#include "hw_da_pp.h"

#include "app_i2c.h"

#define ADC_MASTER
#define SINGLE_ENDED_OUTPUT



//#define ADC_LOOPBACK
//#define DAI_LOOPBACK
//#define SIDETONE         /*BYPASS*/
//#define CLOSE_ADC_OUTPUT
//#define CLOSE_DAC_OUTPUT //close headphone dac output
//#define MIC_IN_INPUT
#define MIC_BIAS_LEVEL
//#define MIC_BYPASS_DAC_PATH
#define ADC_RX_ENABLE

/***********there are 4 parameters for adjust Mic_boost input gain************/
/***********00b =0dB;01b=6dB;10b=12dB; 11b=20dB***********************/


#define MIC_BOOST_GAIN	0x00        //00b:0dB; 01b:6dB; 10b:12dB; 11b:20dB.

//ADC: fixed step=0.75dB; Min: -12dB, Max: 35.25dB
//#define ADC_PCA_GAIN	0x10		//0db
#define ADC_PCA_GAIN	0x00		//-12db

/************************************************************************/
void hw_codec_adc_channel_with_gain(U8 channel,U8 mic_boost, U8 gain_dB, U8 diff)
{
	U8 temp, val;
/*************IF ALC function is selected the following ADC PAG_gain setting will be invalid .***/
/*************ADC POWER UP for Corresponding channel *****************/

    temp = 0x06;
    REG_CODEC_R57 = temp;  //ADC mute enable
    delayms(100);

    #if 1
        if(channel == enAUX_CHANNEL)
        {
            temp = 0x9D;   // noise 0x2 Good for LINR IN  1011 1101 0xBD; or 1001 1101 (bit5 = 0 extra delay).
            //temp = 0xBD;   ////LINR IN  1011 1101  (bit5 = 1 quick inverter).temp = 0xBD;
        }

        else if(channel == enMIC_P_CHANL)
        {
            temp = 0x9F;     // noise 0x3-4 MIC IN  without Mic_bias power up at 6bit and no delay
          //temp = 0x9F;   // have extra delay
          
        }

        else if(channel == enMIC_P_CH_WITH_BIAS)
        {
          //mp = 0xDF;   // have extra delay
          temp = 0xFF;   // Mic_bias Power up with no delay
          
        }
        else 
        {
          temp = 0x00;   //audio_codec_ADC power down.
          REG_CODEC_R4B = temp;
          delayms(5);

          #if (defined AUDIO_PWM_OUTPUT)
              temp = 0x00;   
              REG_CODEC_R12 = temp;  // dac playback is not used
              delayms(5);
          #endif

          return;
        }
    #endif

        REG_CODEC_R4B = temp; //ADC power on
        delayms(10);


/******************channels select**************************/

            //i = 38
    if((channel == enMIC_P_CHANL) || (channel == enMIC_P_CH_WITH_BIAS))
    {
        if(diff == enDIFFERENTIAL)
        {
            temp = 0x1E;         // MIC differential input 0x1E  very good
        } 
        else
        {   
            //#ifdef OTK5286_B_D
            temp = 0x1E;          //otk528x  
        	//#endif
        }
    }       
    else 
    {   
        #if( defined  OTK5286_B_D || defined HAVE_VREF_PIN)
        {
            temp = 0x22;	
        }
        #else
        {

            //temp = 0x18;
            //temp = 0x1A;

            temp = 0x12;   //differential for otk5285 for no VREF pin
        }
        #endif
    }
	
    REG_CODEC_R4C = temp;   // channel and single -ended select
    delayms(10);

/***********bandgad Reference voltage Fine Tune ************/
    #if (defined  OTK5286_B_D)
       temp = 0xDB;                 //noise 0x2

    #elif (defined OTK5285) 
       if(channel == enAUX_CHANNEL)
       {
           //temp = 0x3F;        // noise 0x5-6
           temp = 0x5B;          // 0x5-6
           
       }
       else
       {
           temp = 0x3B;          // noise 0x6
       }     
    #else
           temp = 0x1B;         // noise 0x6 with R4C = 0x1E;

    #endif

       REG_CODEC_R12 = temp;  // 0xdf,bf,9f,7f,3f,1f only one can select

       delayms(10);
        
 /*******************************************************************/       
 /************************power gain with boost of Mic **************/       
    U8   mic_boost_gain = 0;
    char adc_pga_gain = 0;

    if (channel == enMIC_P_CHANL || enMIC_P_CH_WITH_BIAS)
    {
        switch(mic_boost)
       {
            case enMIC_BOOST_0dB:
                 mic_boost_gain =0;
                 break;
            case enMIC_BOOST_6dB:
                 mic_boost_gain =1;
                 break;
            case enMIC_BOOST12dB:
                 mic_boost_gain =2;
                 break;
            case enMIC_BOOST20dB:
                 mic_boost_gain =3;
                 break;
            default:
                mic_boost_gain  =0;
                 break;       
        }
     }
     else
     {
           mic_boost_gain =0;
     }

    adc_pga_gain = HW_CODEC_ADC_PGA_UNIT_dB (gain_dB);
 	if (adc_pga_gain < 0)
 	{
		adc_pga_gain = 0x0;
	}
	else if(adc_pga_gain > 0x3F)
	{
		adc_pga_gain = 0x3E;
	}
    else
    {   
        adc_pga_gain = (adc_pga_gain & 0x3E);   // it is only for getting a value of even.
    }
	
    //i = 42 Left channel
	temp = adc_pga_gain | (mic_boost_gain << 6);
	REG_CODEC_R51 = temp;
	
   

    delayms(50);
	//i = 43 Right channel
	temp = adc_pga_gain | (mic_boost_gain << 6);
	REG_CODEC_R52 = temp;
	delayus(50);
  
    temp = 0x00;
    REG_CODEC_R57 = temp;  //ADC mute disable
    delayms(100);
    
}

void hw_codec_adc_ALC_Peak_Limiter(U8 alc_sel,U8 alc_mod,U8 maxgain,U8 mingain,U8 noise_threshold,U8 alc_lvl)
{
    U8 temp, val;
	
	if( alc_sel == enALC_SEL_INVALID)
    {   
    	temp = 0x00;
    	REG_CODEC_R54 = temp;   //ALC_SEL_Disable.
    	
       
    	delayms(50);
        return;
    }
    else
    {   
        #if 1
        if(alc_mod == enALC_NORMAL_MOD)
        {
            temp = 0x80 | ( maxgain<<3 | mingain );
        	REG_CODEC_R54 = temp;   //ALC_SEL_is active with alc_mode, gain max,gain min.

        
        	delayms(50);

            temp = HW_CODEC_ADC_ALC_LEVEL_dBFS(alc_lvl);
            temp = ((temp << 4 | noise_threshold <<1) & 0xFF);
        	REG_CODEC_R55 = temp;   //ALC_SEL_is active with alc_mode, gain max,gain min.
        	
          
        	delayms(50);
        }
        else //limiter mode
        {

            temp = 0xC0 | ( maxgain<<3 | mingain );
        	REG_CODEC_R54 = temp;   //ALC_SEL_is active with alc_mode, gain max,gain min.
        	
        	delayms(50);

            temp = HW_CODEC_ADC_ALC_LEVEL_dBFS(alc_lvl);
            temp = ((temp << 4 | noise_threshold <<1) & 0xFF);
        	REG_CODEC_R55 = temp;   //ALC_SEL_is active with alc_mode, gain max,gain min.
        	
        	delayms(50);
       }
       #endif

            temp =  0x44;    
            REG_CODEC_R56 = temp;  //attack timing step.
            delayms(5);

            temp =  0xc4;    
            REG_CODEC_R58 = temp;  //attenuation noise by 33dB.
            delayms(5);

            temp =  0x44;    
            REG_CODEC_R5A = temp;  //Right channel
            delayms(5);
            temp =  0x07;          // 
            REG_CODEC_R5B = temp;  //Right channel
            delayms(5);
    }

}
void hw_codec_dac_output_with_gain(U8 enable,U8 gain_dB, U8 sidetone )
{
    

    U8 temp, val;
    //i = 1
	temp = 0x87;
	REG_CODEC_R09 = temp;   //DAC soft mute enable
	delayms(100);

    if( enable == enDAC_POWER_OFF)
    {
       
       #if 0  //adc is not working. dissipation 4-6mA at 4.0V input
       temp = 0x00;
       REG_CODEC_R12 = temp;  //bandgap power down
       delayms(5);
       
       temp = 0x40;           // 0x40 RAM power saving mode.
	   REG_CODEC_R40 = temp;
       delayus(10);
       
       #endif

       temp = 0x00; 
       REG_CODEC_R0F = temp;  //DAC,headphone power down
       delayus(10);
      
       
       return;
    }

    else
    {
        #if 0
        //i = 2   noted: removed to ADC
        temp = 0xDB;	
        REG_CODEC_R12 = temp;
    	delayus(5);
        #endif
     

        #if 1
        temp = 0xD4;
    	REG_CODEC_R11 = temp;   
        delayus(10);
    	//i = 3
    	//temp = 0x02;
        temp = 0x4e;
		//temp = 0xce;
    	REG_CODEC_R10 = temp;  //output bias current reduce at 6bit.
    	delayus(5);
        
    	//i = 5
    	temp = 0x2C;
    	REG_CODEC_R15 = temp;  //basic setup for DAC internal Regulator
    	delayus(50);

        //i = 6
    	temp = 0xD4;
    	REG_CODEC_R11 = temp;   //
    	
        delayms(1);

    	//i = 7
        temp = 0xB6;			  //anti-pop function
    	REG_CODEC_R13 = temp;
    
        delayms(1);

    	//i = 8
    	temp = 0x48;
    	REG_CODEC_R0F = temp;    // DAC_POWER_ON
    	delayus(10);

        //i = 9
    	temp = 0x7C;
    	REG_CODEC_R0F = temp;    // DAC_POWER_ON
    	delayus(50);
        
        //i = 10
    	temp = 0x7D;           //7E. Disable sidetone analog pass to DAC at 7bit.
    	REG_CODEC_R0F = temp;  // DAC_POWER_ON
    	
       
    	temp = 0x02;     //11.45mA

    	//i = 11
    	//temp = 0x06;
        //temp = 0x4e;
    	REG_CODEC_R10 = temp;  //output bias current reduce at 6bit. repeating i = 3.
    	delayus(5);

        //i = 12
    	temp = 0x0E;
    	REG_CODEC_R02 = temp;  // i2s format
    	delayus(5);
      

    	//i = 13
    	temp = 0x04;
    	REG_CODEC_R03 = temp;  //mclk1 divide.
    	delayus(5);
       
    	//i = 14
    	temp = 0x00;
    	REG_CODEC_R04 = temp;  //zero crossing setup
    	delayus(5);
       


    	//j = 15
    	//temp = 0x9F;  // 0xd4
    	temp = 0xD4;
        
    	REG_CODEC_R11 = temp;  //adjust internal  analog current
    	delayus(5);
       
    	//i = 16
    	temp = 0x00;
    	REG_CODEC_R05 = temp;  //oversampling ratio.
    	delayus(5);
       

    	//i = 17
    	temp = 0xB1;
    	REG_CODEC_R06 = temp;       //256FS
    	delayus(5);
       

           //i = 18
        #ifdef ADC_LOOPBACK         //PCM digital loopback adc to dac
    	temp = 0x02;	
        #else
    	temp = 0x00;
        #endif
    	REG_CODEC_R0B = temp;      //PCM digital loopback to dac
    	delayus(5);
      

    	//i = 19
        #ifdef DAI_LOOPBACK        //slave mode
    	temp = 0x88;
        #else
    	temp = 0x08;
        #endif
    	REG_CODEC_R0C = temp;  
    	delayus(5);
       

    	//i = 20
    	temp = 0x40;
    	REG_CODEC_R0D = temp;
    	delayus(5);
       

    	//i = 21
    	temp = 0x00;
    	REG_CODEC_R0E = temp;
    	delayus(5);
      
    	//i = 22

        
    	//i = 25
    	temp = 0xED;
    	REG_CODEC_R36 = temp;
    	delayus(5);
        

    	//i = 26
    	temp = 0x86;
    	REG_CODEC_R09 = temp;    //soft dac mute disable
    
       
        #endif

        temp = HW_CODEC_DAC_PGA_UNIT_dB(gain_dB);

        REG_CODEC_R17 = temp;
        delayus(5);
        REG_CODEC_R18 = temp;
        delayus(5);
       
        
       
    }

    if(sidetone == 1)   // DAC_power_on with sidetone bypass to DAC at 7bit
	{ 
       temp = 0x80;
       REG_CODEC_R0F = REG_CODEC_R0F | temp;
	   delayus(5);
       
       temp = 0x01;
       REG_CODEC_R4F = REG_CODEC_R4F | temp;  // bit0 enable sidetone bypass to DAC mixter output path.
	   delayus(5);
      
       
    }
    delayms(10);


    temp = 0x86;
	REG_CODEC_R09 = temp;   //ADC mute disable.
	delayms(100);


}
void hw_codec_adc_init(void)
{
	U8 temp, val;
	
    //i = 4
	temp = 0x22;          //R14 output mixer gain attenuation -3.3db
	REG_CODEC_R14 = temp;
	delayus(5);

    //i = 27
	temp = 0x04;
	REG_CODEC_R40 = temp;   //soft reset enable to adc analog core at bit2 
	
    delayms(10);
   

	//i = 28
	temp = 0x00;  
	REG_CODEC_R40 = temp;
	delayms(10);
   

	//i = 29
	temp = 0x0E;
	REG_CODEC_R41 = temp;
	delayus(5);
   

	//i = 20
	//temp = 0x2A;             // 14.94HZ
	//temp = 0x18;             // HPF_cut_off at 120.3Hz
	//temp = 0x1E;             // 59.92
    temp = 0x22;               // HPF 29.9Hz
	REG_CODEC_R42 = temp;  
	delayus(5);
   
	//i = 31
	temp = 0x04;
	REG_CODEC_R43 = temp;
	delayus(5);
   
    //i = 32
	temp = 0x90;
	REG_CODEC_R44 = temp;
	delayus(5);
   
    //j = 33
	temp = 0x10;
	REG_CODEC_R44 = temp;  //SINC_Rate=16,value=0x10;
	delayus(5);
    
    //i = 34
	temp = 0x00;
	REG_CODEC_R45 = temp;
	delayus(5);
    
    //i = 35
	temp = 0x40;
	REG_CODEC_R48 = temp;
	delayus(5);
    
	//i = 36
	temp = 0x00;
	REG_CODEC_R49 = temp;
	delayus(5);
   
	//i = 37
   
    //i = 38

	//i = 39
	//temp = 0x3C;  
	temp = 0x17;    // 0x17 reduce internal consumption.
	REG_CODEC_R4D = temp;
	delayus(5);
   

	//i = 40
    #ifdef MIC_BIAS_LEVEL
    #ifdef MIC_BYPASS_DAC_PATH
    //temp = 0x71;  //Mic_Bias 2.35V(1.608V) with x1 extra driving Strength.
    //temp = 0x31;	//MIC_BIAS 2.35V
    //temp = 0x29;  //MIC_BIAS 1.96(real is 1.337V)
    //temp = 0x19;	//MIC_BIAS 1.81(real is 1.233V)
    temp = 0x09;    //1.57V(real is 1.0V) with reduce bias cousumption(0x08)

    #elif (defined LOW_CONSUMPTION_MODE)
    temp = 0x0C;

    #else
    temp = 0x70;  //Mic_Bias 2.35V(1.608V) with x1 extra driving Strength.
    //temp = 0x30;	//MIC_BIAS 2.35V
    //temp = 0x28;  //MIC_BIAS 1.96(real is 1.337V)
    //temp = 0x18;	//MIC_BIAS 1.81(real is 1.233V)
    //temp = 0x08;  //1.57V(real is 1.0V) with reduce bias cousumption(0x08)
    #endif

    REG_CODEC_R4E = temp;
	delayus(5);   
    #endif
   
    //i = 41
	temp = 0x34;
	REG_CODEC_R4F = temp;
	delayus(5);
   

	//i = 42
	temp = ADC_PCA_GAIN | (MIC_BOOST_GAIN << 6);
	REG_CODEC_R51 = temp;
	delayus(5);
    

	//i = 43
	temp = ADC_PCA_GAIN | (MIC_BOOST_GAIN << 6);
	REG_CODEC_R52 = temp;
	delayus(5);
    

    #if 0   //R54,R55 is only for ALC, but flowing sett value is wrong.
	//i = 44
	temp = 0x38;
	REG_CODEC_R54 = temp;
	delayus(5);
   
    //i = 45
	temp = 0x74;
	REG_CODEC_R55 = temp;
	delayus(5);
   
    #endif

    //i = 46
	temp = 0x09; //master
	REG_CODEC_R47 = temp;
	delayus(5);
   
	//i = 47
	temp = 0x00;
	REG_CODEC_R1E = temp;
	delayus(5);
   

    //i = 48
	temp = 0x03;
	REG_CODEC_R40 = temp;
	delayus(5);
    
} 


#if (defined LOW_CONSUMPTION_MODE)
void audio_codec_standby(U8 enable)
{
   if(enable == 1)
   {
       U8 temp;
       temp = 0x87;
       REG_CODEC_R09 = temp;    // ADC soft mute
       delayms(150);

       #if 1  //adc is not working. dissipation will reduce to 4-6mA at 4.0V input
       temp = 0x00;
       REG_CODEC_R12 = temp;  //bandgap power down,it will affect adc and cause it no input
       delayus(5);
       
       temp = 0x40;           // 0x40 RAM power saving mode.
       REG_CODEC_R40 = temp;
       delayus(10);
       #endif

       temp = 0x00; 
       REG_CODEC_R0F = temp;     //ADC,headphone power down
       delayms(50);
   }
   else
   {

        app_dac_adc_fifo_init();  // solved POP noise when switching

        HW_CODEC_ADC_INIT;
        HW_CODEC_ADC_CHANNEL_WITH_GAIN(enMIC_P_CHANL,enMIC_BOOST_6dB,0,enDIFFERENTIAL);

        #if (defined AUDIO_PWM_OUTPUT)
        HW_CODEC_DAC_OUTPUT_WITH_GAIN(enDAC_POWER_OFF, 0, 0);
        #endif
   }
}

#endif

void hw_codec_dac_anti_pop_power_down(void)
{
	U8 temp, val;

	//i = 1
	temp = 0x3F;
	REG_CODEC_R0F = temp;
	delayus(5);
 
	
	//i = 2
	temp = 0x87;
	REG_CODEC_R09 = temp;
	delayus(5);
    
	
	//i = 3
	temp = 0x7D;
	REG_CODEC_R0F = temp;
	delayus(5);
    
	
	//i = 4
	temp = 0x48;
	REG_CODEC_R0F = temp;
	delayus(5);
    
	
	delayms(1000);
	//i = 5
	temp = 0x40;
	REG_CODEC_R0F = temp;
	delayus(5);
   

	//i = 6
	temp = 0x01;
	REG_CODEC_R13 = temp;
	delayus(5);
   
	//i = 7
	temp = 0x00;
	REG_CODEC_R12 = temp;
	delayus(5);
   
}

	
void audio_code_init(void)
{
	U32 i;
	U8 val;
	U8 flag;
	volatile U32 tmp,tmp1,tmp2,tmp3,temp;
	MISC_PLL_CONTROLs *pll_config;

#if 1//def SPDIF_TX_ENABLE
	//channel_status = 43'b01_1111_101_1_00_11_0000_0001_0001_00000000_00_000_1_0_0;
	//non pcm
	//channel_status = 43'b01_1111_101_1_00_11_0000_0000_0001_00000000_00_000_1_1_0;
	SPDIF_CONFIG_AHB *p_spdif_config;

	temp = SPDIF_CONFIG;
   
    p_spdif_config = (SPDIF_CONFIG_AHB *) &temp;

    p_spdif_config->spdif_enc_enable = 1;
    p_spdif_config->spdif_dec_enable = 1;

	//p_spdif_config->adc_slave = 1;
    
    p_spdif_config->spdif_dec_aux_mask = 1;
    p_spdif_config->spdif_dec_sr_detect_start = 1;
    #ifdef AUDIO_24_BIT_OUTPUT	
    p_spdif_config->spdif_enc_data_24b = 1;
    #else
	p_spdif_config->spdif_enc_data_24b = 0;
    #endif
    
    p_spdif_config->spdif_data_sel = 0;

/*	
    if (MI2S_CHANs == 3) 
        p_spdif_config->spdif_enc_stream = 2;
    else    
        p_spdif_config->spdif_enc_stream = 0;
*/

    p_spdif_config->spdif_enc_stream = 0;

    p_spdif_config->spdif_enc_sample_delay = 6;
    
    p_spdif_config->dac_enable = 1;
    

#ifdef ADC_RX_ENABLE

    #ifdef ADC_MASTER
	p_spdif_config->adc_slave =   1;
    #else
	p_spdif_config->adc_slave =   0;
    #endif
    p_spdif_config->adc_enable =  1; 
#endif

    p_spdif_config->adc_bck_div = 1;

#ifdef AUDIO_ADC_24BIT
    p_spdif_config->adc_i2s_24bit = 1; //1:24-BIT INPUT; 0:16-BIT INPUT
#else
    p_spdif_config->adc_i2s_24bit = 0; //1:24-BIT INPUT; 0:16-BIT INPUT
#endif

    p_spdif_config->adc_lrck_swap = 1;

    SPDIF_CONFIG = temp;


#if 1//ndef AUDIO_PWM_OUTPUT	
	DA_PP_CLASSD_EN |= 0x02; //spdif_en enable
#endif


    //codec setting
#define CODEC_TEST

#ifdef CODEC_TEST
    //U32 val;
	MISC_AUDIO_CODEC_CONTROLs *AudCodec_config;
    U32 test_err = 0;
    
	tmp = REG_MISC_AUDIO_CODEC;
	AudCodec_config = (MISC_AUDIO_CODEC_CONTROLs *)&tmp;
	
	AudCodec_config->codec_Resetn  = 1;
	AudCodec_config->codec_I2C_mode = 0;
	AudCodec_config->codec_MODE = 0;
	AudCodec_config->codec_CSB  = 1;
	AudCodec_config->codec_EXT_CLK_div  = 0;
	REG_MISC_AUDIO_CODEC = tmp;

	delayus(5);    

    hw_codec_adc_init();
    #if 1 //(defined OTK5283P || defined OTK5282P || defined OTK5282)
       // hw_codec_adc_channel_with_gain(enMIC_P_CHANL,enMIC_BOOST_6dB,0,enDIFFERENTIAL);
        hw_codec_adc_channel_with_gain(enAUX_CHANNEL,enMIC_BOOST_6dB,0,enDIFFERENTIAL);
        #if (defined LOW_CONSUMPTION_MODE)
        app_pmu_voltage_ctl(enDC_BUCK_1V6, enLDO_CORE1V0, enCODEC_LDO_2V5);
        #endif
    #else
        hw_codec_adc_channel_with_gain(enAUX_CHANNEL,enMIC_BOOST_0dB,0,enSINGLE_ENDED);
    #endif
    //hw_codec_adc_channel_with_gain(enAUX_CHANNEL,enMIC_BOOST_0dB,0,enDIFFERENTIAL);

    //hw_codec_adc_ALC_Peak_Limiter(enALC_SEL_ACTIVE,enALC_NORMAL_MOD,enALC_MAX_18dB,enALC_MIN_12dB,enNOISE_THD_M66FS,-1.5);
    //hw_codec_adc_ALC_Peak_Limiter(enALC_SEL_ACTIVE,enALC_NORMAL_MOD,enALC_MAX_0dB,enALC_MIN_6dB,enNOISE_THD_M66FS,-4.5);

    #if (defined AUDIO_PWM_OUTPUT)
    
    hw_codec_dac_output_with_gain(enDAC_POWER_ON,0,0);
    hw_codec_dac_output_with_gain(enDAC_POWER_OFF,0,0);   // dissipation 12mA at 4.0V and mic input, reducing 5ma than dac on

    #else
    hw_codec_dac_output_with_gain(enDAC_POWER_ON,0,0);
    #endif

#endif //CODEC_TEST    

#endif //SPDIF_TX_ENABLE
}

void adc_rev_fifo_reset(void)
{
    U32 temp;
	SPDIF_CONFIG_AHB *p_spdif_config;

	temp = SPDIF_CONFIG;

    p_spdif_config->adc_enable =  0; 
    SPDIF_CONFIG = temp;
    delayus(100);
    p_spdif_config->adc_enable =  1; 
    SPDIF_CONFIG = temp;         
}

#endif