Echo / T3212_B2B_723 · Commits

Commit 5beb4058cc28356d3c3760a4fa88eca96bac428a

Authored by jiangchaobing
1 parent 6977faf1

T3212:add lcm(gc9503) drv

Inline Side-by-side
Showing 3 changed files with 1424 additions and 8 deletions
@@ -127,7 +127,12 @@ void spi_ini(void) @@ -127,7 +127,12 @@ void spi_ini(void)
127 case GC9304: 127 case GC9304:
128 spi_ini_GC9304(); 128 spi_ini_GC9304();
129 break; 129 break;
130 - #endif 130 + #endif
  131 + #if defined(__TOPWELL_HW_LCD_IC_GC9305__)
  132 + case GC9305:
  133 + spi_ini_GC9305();
  134 + break;
  135 + #endif
131 #if defined(__TOPWELL_HW_LCD_IC_ILI9340L__) 136 #if defined(__TOPWELL_HW_LCD_IC_ILI9340L__)
132 case ILI9340L: 137 case ILI9340L:
133 spi_ini_ILI9340L(); 138 spi_ini_ILI9340L();
@@ -261,6 +266,12 @@ void init_lcd_interface(void) @@ -261,6 +266,12 @@ void init_lcd_interface(void)
261 init_lcd_interface_GC9304(); 266 init_lcd_interface_GC9304();
262 break; 267 break;
263 #endif 268 #endif
  269 +
  270 + #if defined(__TOPWELL_HW_LCD_IC_GC9305__)
  271 + case GC9305:
  272 + init_lcd_interface_GC9305();
  273 + break;
  274 + #endif
264 275
265 #if defined(__TOPWELL_HW_LCD_IC_ILI9340L__) 276 #if defined(__TOPWELL_HW_LCD_IC_ILI9340L__)
266 case ILI9340L: 277 case ILI9340L:
@@ -393,7 +404,14 @@ void LCD_FunConfig(void) @@ -393,7 +404,14 @@ void LCD_FunConfig(void)
393 case GC9304: 404 case GC9304:
394 LCD_FunConfig_GC9304(); 405 LCD_FunConfig_GC9304();
395 break; 406 break;
396 - #endif 407 + #endif
  408 +
  409 + #if defined(__TOPWELL_HW_LCD_IC_GC9305__)
  410 + case GC9305:
  411 + LCD_FunConfig_GC9305();
  412 + break;
  413 + #endif
  414 +
397 #if defined(__TOPWELL_HW_LCD_IC_ILI9340L__) 415 #if defined(__TOPWELL_HW_LCD_IC_ILI9340L__)
398 case ILI9340L: 416 case ILI9340L:
399 LCD_FunConfig_ILI9340L(); 417 LCD_FunConfig_ILI9340L();
@@ -528,6 +546,12 @@ void LCD_gamma_test(kal_uint8 level, kal_uint8 color) @@ -528,6 +546,12 @@ void LCD_gamma_test(kal_uint8 level, kal_uint8 color)
528 LCD_gamma_test_GC9304(level, color); 546 LCD_gamma_test_GC9304(level, color);
529 break; 547 break;
530 #endif 548 #endif
  549 +
  550 + #if defined(__TOPWELL_HW_LCD_IC_GC9305__)
  551 + case GC9305:
  552 + LCD_gamma_test_GC9305(level, color);
  553 + break;
  554 + #endif
531 555
532 #if defined(__TOPWELL_HW_LCD_IC_ILI9340L__) 556 #if defined(__TOPWELL_HW_LCD_IC_ILI9340L__)
533 case ILI9340L: 557 case ILI9340L:
@@ -660,7 +684,13 @@ void LCD_flicker_test(kal_uint8 level) @@ -660,7 +684,13 @@ void LCD_flicker_test(kal_uint8 level)
660 case GC9304: 684 case GC9304:
661 LCD_flicker_test_GC9304(level); 685 LCD_flicker_test_GC9304(level);
662 break; 686 break;
663 - #endif 687 + #endif
  688 +
  689 + #if defined(__TOPWELL_HW_LCD_IC_GC9305__)
  690 + case GC9305:
  691 + LCD_flicker_test_GC9305(level);
  692 + break;
  693 + #endif
664 694
665 #if defined(__TOPWELL_HW_LCD_IC_ILI9340L__) 695 #if defined(__TOPWELL_HW_LCD_IC_ILI9340L__)
666 case ILI9340L: 696 case ILI9340L:
@@ -794,6 +824,11 @@ kal_bool LCM_ID_Validation(void) @@ -794,6 +824,11 @@ kal_bool LCM_ID_Validation(void)
794 return LCM_ID_check_GC9304(); 824 return LCM_ID_check_GC9304();
795 #endif 825 #endif
796 826
  827 + #if defined(__TOPWELL_HW_LCD_IC_GC9305__)
  828 + case GC9305:
  829 + return LCM_ID_check_GC9305();
  830 + #endif
  831 +
797 832
798 #if defined(__TOPWELL_HW_LCD_IC_ILI9340L__) 833 #if defined(__TOPWELL_HW_LCD_IC_ILI9340L__)
799 case ILI9340L: 834 case ILI9340L:
@@ -907,6 +942,9 @@ void Get_LCM_ALLID_String(U8 *get_buf) @@ -907,6 +942,9 @@ void Get_LCM_ALLID_String(U8 *get_buf)
907 #if defined(__TOPWELL_HW_LCD_IC_GC9304__) 942 #if defined(__TOPWELL_HW_LCD_IC_GC9304__)
908 mmi_ucs2cat((CHAR*) get_buf, (const CHAR*)L"GC9304\n"); 943 mmi_ucs2cat((CHAR*) get_buf, (const CHAR*)L"GC9304\n");
909 #endif 944 #endif
  945 +#if defined(__TOPWELL_HW_LCD_IC_GC9305__)
  946 + mmi_ucs2cat((CHAR*) get_buf, (const CHAR*)L"GC9305\n");
  947 +#endif
910 #if defined(__TOPWELL_HW_LCD_IC_ILI9340L__) 948 #if defined(__TOPWELL_HW_LCD_IC_ILI9340L__)
911 mmi_ucs2cat((CHAR*) get_buf, (const CHAR*)L"ILI9340L\n"); 949 mmi_ucs2cat((CHAR*) get_buf, (const CHAR*)L"ILI9340L\n");
912 #endif 950 #endif
@@ -1008,6 +1046,11 @@ kal_uint8* Get_LCM_ID_String(void) @@ -1008,6 +1046,11 @@ kal_uint8* Get_LCM_ID_String(void)
1008 return "GC9304"; 1046 return "GC9304";
1009 #endif 1047 #endif
1010 1048
  1049 + #if defined(__TOPWELL_HW_LCD_IC_GC9305__)
  1050 + case GC9305:
  1051 + return "GC9305";
  1052 + #endif
  1053 +
1011 1054
1012 #if defined(__TOPWELL_HW_LCD_IC_ILI9340L__) 1055 #if defined(__TOPWELL_HW_LCD_IC_ILI9340L__)
1013 case ILI9340L: 1056 case ILI9340L:
  1 +/*****************************************************************************
  2 +* Copyright Statement:
  3 +* --------------------
  4 +* This software is protected by Copyright and the information contained
  5 +* herein is confidential. The software may not be copied and the information
  6 +* contained herein may not be used or disclosed except with the written
  7 +* permission of MediaTek Inc. (C) 2001
  8 +*
  9 +*****************************************************************************/
  10 +
  11 +/*****************************************************************************
  12 + *
  13 + * Filename:
  14 + * ---------
  15 + * lcd.c
  16 + *
  17 + * Project:
  18 + * --------
  19 + * Maui_Software
  20 + *
  21 + * Description:
  22 + * ------------
  23 + * This Module defines the LCD driver.
  24 + *
  25 + * Author:
  26 + * -------
  27 + * -------
  28 + *
  29 + ****************************************************************************/
  30 +#ifdef FPGA
  31 +#include "lcd_feature.h"
  32 +#include "typedefs.h"
  33 +#include "dma_maui_api.h"
  34 +
  35 +#include "hw_reg.h"
  36 +#include "lcm_if.h"
  37 +#include "lcd_if.h"
  38 +#include "lcd_sw_inc.h"
  39 +#include "lcd_sw.h"
  40 +#include "lcd_hw.h"
  41 +#pragma arm section code="SDRAMCODE"
  42 +
  43 +#else
  44 +#include "drv_comm.h"
  45 +#include "reg_base.h"
  46 +#include "lcd_sw_inc.h"
  47 +#include "lcd_sw.h"
  48 +#include "lcd_hw.h"
  49 +/*Serial interface*/
  50 +#include "lcd_if_hw.h"
  51 +#include "lcm_if.h"
  52 +#include "lcd_if.h"
  53 +#include "eint.h"
  54 +#endif
  55 +#include "dcl.h"
  56 +#include "kal_release.h"
  57 +#include "drv_features_display.h"
  58 +#include "drv_sw_features_display.h"
  59 +#include "drv_comm.h"
  60 +#include "reg_base.h"
  61 +#include "lcd_sw.h"
  62 +#include "lcd_sw_inc.h"
  63 +#include "lcd_if_hw.h"
  64 +#include "lcd_if.h"
  65 +#include "lcd_if_manager.h"
  66 +#include "custom_EMI_release.h"
  67 +#include "nld_central_ctrl.h"
  68 +
  69 +#if defined(__TOPWELL_HW_LCD_240X320_T3212_GC9305_IVO__)
  70 +
  71 +#ifdef LCD_CMD_DMA_MODE
  72 + #define LCD_delay_GC9305()
  73 +
  74 + #if (defined(MAIN_LCD_8BIT_MODE))
  75 + #define LCD_CtrlWrite_GC9305(_data) \
  76 + {\
  77 + SET_LCD_CMD_PARAMETER(0,LCD_CMD,(_data));\
  78 + LCD_SEND_DMA_CMD(1);\
  79 + }\
  80 +
  81 + #define LCD_DataWrite_GC9305(_data) \
  82 + {\
  83 + SET_LCD_CMD_PARAMETER(0,LCD_DATA,(_data));\
  84 + LCD_SEND_DMA_CMD(1);\
  85 + }
  86 + #elif (defined(MAIN_LCD_9BIT_MODE))
  87 +
  88 + #elif (defined(MAIN_LCD_16BIT_MODE))
  89 +
  90 + #elif (defined(MAIN_LCD_18BIT_MODE))
  91 + #define LCD_CtrlWrite_GC9305(_data) \
  92 + {\
  93 + SET_LCD_CMD_PARAMETER(0,LCD_CMD,(_data));\
  94 + LCD_SEND_DMA_CMD(1);\
  95 + }\
  96 +
  97 + #define LCD_DataWrite_GC9305(_data) \
  98 + {\
  99 + SET_LCD_CMD_PARAMETER(0,LCD_DATA,(_data));\
  100 + LCD_SEND_DMA_CMD(1);\
  101 + }
  102 + #endif
  103 +#else /*LCD_CMD_DMA_MODE*/
  104 +#if defined (__SERIAL_LCM__)
  105 + #define LCD_delay_GC9305()
  106 + #if (defined(MAIN_LCD_8BIT_MODE)||defined(MAIN_LCD_16BIT_MODE))
  107 +
  108 + #define LCD_CtrlWrite_GC9305(_data) \
  109 + {\
  110 + SET_LCD_SERIAL0_IF_SIZE(LCD_SCNF_IF_WIDTH_8); \
  111 + *(volatile kal_uint8 *) MAIN_LCD_CMD_ADDR= (_data);\
  112 + LCD_delay_GC9305();\
  113 + }\
  114 +
  115 + #define LCD_DataWrite_GC9305(_data) \
  116 + {\
  117 + SET_LCD_SERIAL0_IF_SIZE(LCD_SCNF_IF_WIDTH_8); \
  118 + *(volatile kal_uint8 *) MAIN_LCD_DATA_ADDR= (_data);\
  119 + LCD_delay_GC9305();\
  120 + }
  121 +
  122 + #endif
  123 + #else /*__SERIAL_LCM__*/
  124 + #define LCD_delay_GC9305()
  125 + #if (defined(MAIN_LCD_8BIT_MODE))
  126 + #define LCD_CtrlWrite_GC9305(_data) \
  127 + {\
  128 + *(volatile kal_uint8 *) MAIN_LCD_CMD_ADDR = (_data );\
  129 + LCD_delay_GC9305();\
  130 + LCD_delay_GC9305();\
  131 + LCD_delay_GC9305();\
  132 + LCD_delay_GC9305();\
  133 + }\
  134 +
  135 +
  136 + #define LCD_DataWrite_GC9305(_data) \
  137 + {\
  138 + *(volatile kal_uint8 *)MAIN_LCD_DATA_ADDR = (_data);\
  139 + LCD_delay_GC9305();\
  140 + LCD_delay_GC9305();\
  141 + LCD_delay_GC9305();\
  142 + LCD_delay_GC9305();\
  143 + }
  144 + #endif
  145 +#endif /*__SERIAL_LCM__*/
  146 +
  147 +#endif /* LCD_CMD_DMA_MODE */
  148 +
  149 +#if (defined(MAIN_LCD_8BIT_MODE)||defined(MAIN_LCD_16BIT_MODE))
  150 + #define LCD_DataRead_GC9305 (*(volatile kal_uint8 *)MAIN_LCD_DATA_ADDR);
  151 +#elif (defined(MAIN_LCD_18BIT_MODE))
  152 + #define LCD_DataRead_GC9305 (*(volatile kal_uint32 *)MAIN_LCD_DATA_ADDR);
  153 +#endif
  154 +
  155 +
  156 +extern void LCD_BlockWrite_GC9305(kal_uint16 startx,kal_uint16 starty,kal_uint16 endx,kal_uint16 endy);
  157 +
  158 +
  159 +
  160 +/* Debug use only. */
  161 +//#define __GC9305_DEBUG_TRACE__
  162 +
  163 +
  164 +static void LCD_Delay(kal_uint32 delay_count)
  165 +{
  166 + volatile kal_uint32 delay;
  167 + for (delay =0;delay <(delay_count*4);delay++) {}
  168 +}
  169 +
  170 +static void Delayms(kal_uint16 data)
  171 +{
  172 +#if defined(__UBL__)
  173 + kal_uint32 time1=0, diff=0;
  174 +
  175 + time1=drv_get_current_time();
  176 +
  177 + while(drv_get_duration_ms(time1) < data);
  178 +#else
  179 + kal_uint32 i;
  180 + while(data--)
  181 + {
  182 + for(i=0;i<220000;i++){}// 1ms=220000 TIMES
  183 + }
  184 +#endif
  185 +}
  186 +void LCD_set_reg_GC9305(kal_uint16 reg_index, kal_uint16 reg_data)
  187 +{
  188 +
  189 + LCD_CtrlWrite_GC9305(reg_index);
  190 + if (reg_data==0xFFFF){
  191 + //no register setting
  192 + }else{
  193 + LCD_DataWrite_GC9305(reg_data);
  194 + }
  195 +}
  196 +
  197 +void spi_ini_GC9305(void)
  198 +{
  199 + #if (defined(MT6218B) || defined(MT6219) || defined(MT6217)||defined(MT6226)||defined(MT6227)||defined(MT6228)||defined(MT6229)||defined(MT6230)||defined(MT6235)||defined(MT6238)||defined(MT6268)||defined(MT6236)||defined(MT6236B))
  200 + REG_LCD_SERIAL_CONFIG = (LCD_SERIAL_CONFIG_CLOCK_PHASE_BIT | LCD_SERIAL_CONFIG_CLOCK_POLARITY_BIT);
  201 + #elif (defined(MT6225)||defined(MT6276))
  202 + //format SET_LCD_SERIAL_IF_ATTRB(spo, sph, _3wire, csp0, csp1);
  203 + //SET_LCD_SERIAL_IF_ATTRB(1, 1, 1, 0, 0);
  204 + //format SET_LCD_SERIAL_IF_TIMING(if_num, clk, div, period);
  205 + //SET_LCD_SERIAL_IF_TIMING(0, LCD_SERIAL_CONFIG_104MHZ_CLK, 1, 0);
  206 + #endif /* MT6218B, MT6219 */
  207 +}
  208 +
  209 +void init_lcd_interface_GC9305(void)
  210 +{
  211 +#if !defined(WIN32)
  212 + dbg_print("init_lcd_interface_GC9305\r\n");
  213 +#endif
  214 +
  215 + //Serial Clock:
  216 + SET_LCD_SERIAL_CLOCK(0, LCD_SERIAL_CLOCK_132MHZ);
  217 + //SET_LCD_SERIAL_CLOCK(0, LCD_SERIAL_CLOCK_26MHZ);
  218 +
  219 + #if defined(SERIAL_LCM_2_DATA_LINE_PROTOCOL)
  220 + ENABLE_LCD_SERIAL0_2PIN;
  221 + #if defined(MAIN_LCD_16BIT_MODE)
  222 + SET_LCD_SERIAL0_IF_2PIN_SIZE(LCD_SCNF_IF_2PIN_WIDTH_16);
  223 + #elif defined(MAIN_LCD_18BIT_MODE)
  224 + SET_LCD_SERIAL0_IF_2PIN_SIZE(LCD_SCNF_IF_2PIN_WIDTH_18);
  225 + #endif
  226 + #endif
  227 +
  228 + #if defined(SLCD_FEATURE_SINGLE_A0_MODE)
  229 + ENABLE_LCD_SERIAL0_SINGLE_A0;
  230 + #else
  231 + DISABLE_LCD_SERIAL0_SINGLE_A0;
  232 + #endif
  233 +
  234 + #if defined(SLCD_FEATURE_CS_STAY_LOW_MODE)
  235 + ENABLE_LCD_SERIAL0_CS_STAY_LOW;
  236 + #else
  237 + DISABLE_LCD_SERIAL0_CS_STAY_LOW;
  238 + #endif
  239 +
  240 +
  241 + //Define serial LCM work mode here
  242 + #if (defined(SERIAL_LCM_4WIRE_1_DATA_LANE))
  243 + DISABLE_LCD_SERIAL0_3WIRE;
  244 + #elif (defined(SERIAL_LCM_3WIRE_1_DATA_LANE)||defined(SERIAL_LCM_3WIRE_2_DATA_LANE))
  245 + ENABLE_LCD_SERIAL0_3WIRE;
  246 + DISABLE_LCD_SERIAL0_SDI;
  247 + #endif
  248 +
  249 + ENABLE_LCD_SERIAL_IF_HW_CS;//HW CS
  250 +
  251 + #if defined(MAIN_LCD_16BIT_MODE)
  252 + SET_LCD_SERIAL0_IF_SIZE(LCD_SCNF_IF_WIDTH_16);
  253 + #elif defined(MAIN_LCD_18BIT_MODE)
  254 + SET_LCD_SERIAL0_IF_SIZE(LCD_SCNF_IF_WIDTH_18);
  255 + #elif defined(MAIN_LCD_8BIT_MODE)
  256 + SET_LCD_SERIAL0_IF_SIZE(LCD_SCNF_IF_WIDTH_8);
  257 + #endif
  258 +
  259 + //Timing need tuning
  260 + SET_LCD_SERIAL_IF_CSS(0,1); //
  261 + SET_LCD_SERIAL_IF_CSH(0,1);
  262 +
  263 + SET_LCD_SERIAL_IF_WR_1ST(0,1);//
  264 + SET_LCD_SERIAL_IF_WR_2ND(0,1);
  265 + SET_LCD_SERIAL_IF_RD_1ST(0,0x0f);//
  266 + SET_LCD_SERIAL_IF_RD_2ND(0,0x0f);
  267 + SET_LCD_SERIAL0_IF_SIZE(LCD_SCNF_IF_WIDTH_8);//CMD use 8 bit width
  268 +
  269 + #if defined(MAIN_LCD_16BIT_MODE_RGB888)
  270 + SET_LCD_SEND_RES_MODE(1);
  271 + #endif
  272 +
  273 + //Set Driving current
  274 + set_lcd_driving_current_centralize(LCD_DRIVING_16MA);
  275 +} /* init_lcd_interface() */
  276 +
  277 +void CABC_function_GC9305(kal_uint16 mode)
  278 +{
  279 +return;
  280 + switch(mode){
  281 + case 0:
  282 + //CABC Mode off Setting
  283 + LCD_CtrlWrite_GC9305(0x55); //Set CABC Mode off
  284 + LCD_DataWrite_GC9305(0x00);
  285 + break;
  286 +
  287 + case 1:
  288 + //CABC UI Mode Setting
  289 + LCD_CtrlWrite_GC9305(0x51); //DBV[7:0]=0xFF
  290 + LCD_DataWrite_GC9305(0xFF);
  291 + LCD_CtrlWrite_GC9305(0x53); //BCTRL=1, BL=1
  292 + LCD_DataWrite_GC9305(0x24);
  293 + LCD_CtrlWrite_GC9305(0x55); //Set CABC UI Mode
  294 + LCD_DataWrite_GC9305(0x01);
  295 + break;
  296 +
  297 + case 2:
  298 + //CABC Still_mode Setting
  299 + LCD_CtrlWrite_GC9305(0x51); //DBV[7:0]=0xFF
  300 + LCD_DataWrite_GC9305(0xFF);
  301 + LCD_CtrlWrite_GC9305(0x53); //BCTRL=1, BL=1
  302 + LCD_DataWrite_GC9305(0x24);
  303 + LCD_CtrlWrite_GC9305(0x55); //Set CABC Still Mode
  304 + LCD_DataWrite_GC9305(0x02);
  305 + break;
  306 +
  307 + case 3:
  308 + //CABC Moving_mode Setting
  309 + LCD_CtrlWrite_GC9305(0x51); //DBV[7:0]=0xFF
  310 + LCD_DataWrite_GC9305(0xFF);
  311 + LCD_CtrlWrite_GC9305(0x53); //BCTRL=1, BL=1
  312 + LCD_DataWrite_GC9305(0x24);
  313 + LCD_CtrlWrite_GC9305(0x55); //Set CABC Moving Mode
  314 + LCD_DataWrite_GC9305(0x03);
  315 + break;
  316 + }
  317 +
  318 +}
  319 +
  320 +
  321 +void LCD_EnterSleep_GC9305(void)
  322 +{
  323 +
  324 + LCD_CtrlWrite_GC9305(0xfe);
  325 + LCD_CtrlWrite_GC9305(0xef);
  326 + LCD_CtrlWrite_GC9305(0x28);
  327 + Delayms(120);
  328 + LCD_CtrlWrite_GC9305(0x10);
  329 + Delayms(150);
  330 +
  331 +}
  332 +//void LCD_Init_GC9305(kal_uint32 bkground, void **buf_addr);
  333 +
  334 +void LCD_ExitSleep_GC9305(void)
  335 +{
  336 +
  337 + LCD_CtrlWrite_GC9305(0xfe);
  338 + LCD_CtrlWrite_GC9305(0xef);
  339 + LCD_CtrlWrite_GC9305(0x11);
  340 + Delayms(120) ;
  341 + LCD_CtrlWrite_GC9305(0x29);
  342 + // Init_LCD();
  343 +
  344 + //LCD_Init_GC9305(0,0);
  345 +}
  346 +
  347 +void LCD_Partial_On_GC9305(kal_uint16 start_page,kal_uint16 end_page)
  348 +{
  349 +
  350 +}
  351 +
  352 +void LCD_Partial_Off_GC9305(void)
  353 +{
  354 +
  355 +}
  356 +
  357 +kal_uint8 LCD_Partial_line_GC9305(void)
  358 +{
  359 + return 1; /* partial display in 1 line alignment */
  360 +}
  361 +
  362 +void LCD_blockClear_GC9305(kal_uint16 x1,kal_uint16 y1,kal_uint16 x2,kal_uint16 y2,kal_uint16 data)
  363 +{
  364 + kal_uint16 LCD_x;
  365 + kal_uint16 LCD_y;
  366 + kal_uint8 r_color,g_color,b_color;
  367 +
  368 + r_color=(data&0xF800)>>10; /* transfer to RGB666 */
  369 + g_color=(data>>5)&0x3F;
  370 + b_color=((data)&0x1F)<<1;
  371 +
  372 + LCD_CtrlWrite_GC9305(0x002a);
  373 + LCD_DataWrite_GC9305((x1&0xff00)>>8);//start x
  374 + LCD_DataWrite_GC9305(x1&0x00ff);
  375 +
  376 + LCD_DataWrite_GC9305((x2&0xff00)>>8);//end x
  377 + LCD_DataWrite_GC9305(x2&0x00ff);
  378 +
  379 + LCD_CtrlWrite_GC9305(0x002b);
  380 + LCD_DataWrite_GC9305((y1&0xff00)>>8);//start x
  381 + LCD_DataWrite_GC9305(y1&0x00ff);
  382 +
  383 + LCD_DataWrite_GC9305((y2&0xff00)>>8);//end x
  384 + LCD_DataWrite_GC9305(y2&0x00ff);
  385 +
  386 +
  387 + LCD_CtrlWrite_GC9305(0x002c);//transfor begin
  388 + for(LCD_y=y1;LCD_y<=y2;LCD_y++)
  389 + {
  390 + for(LCD_x=x1;LCD_x<=x2;LCD_x++)
  391 + {
  392 + #if (defined(MAIN_LCD_8BIT_MODE))
  393 + *((volatile unsigned char *) MAIN_LCD_DATA_ADDR)=(kal_uint8)((data&0xFF00)>>8);
  394 + *((volatile unsigned char *) MAIN_LCD_DATA_ADDR)=(kal_uint8)(data&0xFF);
  395 + #elif (defined(MAIN_LCD_9BIT_MODE))
  396 + *((volatile unsigned short *) MAIN_LCD_DATA_ADDR)=((r_color<<6)|(g_color>>3)<<9);
  397 + *((volatile unsigned short *) MAIN_LCD_DATA_ADDR)=((((g_color&0x07)<<6)|b_color)<<9);
  398 + #elif (defined(MAIN_LCD_16BIT_MODE) || defined(MAIN_LCD_18BIT_MODE))
  399 + *((volatile unsigned int *) MAIN_LCD_DATA_ADDR)=(r_color<<12)|(g_color<<6)|b_color;
  400 + #endif
  401 + }
  402 + }
  403 +}
  404 +
  405 +void LCD_ClearAll_GC9305(kal_uint16 data)
  406 +{
  407 + LCD_blockClear_GC9305(0,0,LCD_WIDTH-1,LCD_HEIGHT-1,data);
  408 + //LCD_blockClear_GC9305(0,0,360-1,640-1,data);
  409 +}
  410 +//////////////haiyong add for lcd porting
  411 +void LCD_Read_GRAM_GC9305(kal_uint16 startx,kal_uint16 starty,kal_uint16 endx,kal_uint16 endy)
  412 +{
  413 + kal_uint32 GC9305_GRAM_DATA;
  414 + kal_uint16 LCD_x,LCD_y;
  415 +
  416 +
  417 + LCD_CtrlWrite_GC9305(0x002a);
  418 + LCD_DataWrite_GC9305((startx&0xff00)>>8);//start x
  419 + LCD_DataWrite_GC9305(startx&0x00ff);
  420 +
  421 + LCD_DataWrite_GC9305((endx&0xff00)>>8);//end x
  422 + LCD_DataWrite_GC9305(endx&0x00ff);
  423 +
  424 + LCD_CtrlWrite_GC9305(0x002b);
  425 + LCD_DataWrite_GC9305((starty&0xff00)>>8);//start x
  426 + LCD_DataWrite_GC9305(starty&0x00ff);
  427 +
  428 + LCD_DataWrite_GC9305((endy&0xff00)>>8);//end x
  429 + LCD_DataWrite_GC9305(endy&0x00ff);
  430 +
  431 +#ifdef __GC9305_DEBUG_TRACE__
  432 + kal_prompt_trace(MOD_ENG,"startx starty endx endy= %d, %d, %d, %d",startx,starty,endx,endy);
  433 +#endif
  434 + LCD_CtrlWrite_GC9305(0x002E);
  435 + GC9305_GRAM_DATA=LCD_DataRead_GC9305;
  436 + Delayms(20);
  437 +
  438 + for(LCD_y=starty;LCD_y<=endy;LCD_y++)
  439 + {
  440 + for(LCD_x=startx;LCD_x<=endx;LCD_x++)
  441 + {
  442 + GC9305_GRAM_DATA=LCD_DataRead_GC9305;
  443 +#ifdef __GC9305_DEBUG_TRACE__
  444 + kal_prompt_trace(MOD_ENG,"GC9305_GRAM_DATA = %x",GC9305_GRAM_DATA);
  445 +#endif
  446 + }
  447 + }
  448 +}
  449 +void LCD_Read_ID_GC9305(void)
  450 +{
  451 + kal_uint32 GC9305_ID2;
  452 + LCD_CtrlWrite_GC9305(0x00D3);
  453 + //LCD_DataWrite_GC9305(0x0000);//dummy data
  454 + //LCD_DataWrite_GC9305(0x0088);//read ID2
  455 + GC9305_ID2=LCD_DataRead_GC9305;
  456 + GC9305_ID2=LCD_DataRead_GC9305;
  457 +#ifdef __GC9305_DEBUG_TRACE__
  458 + kal_prompt_trace(MOD_ENG,"GC9305_ID2 = %d",GC9305_ID2);
  459 +#endif
  460 +}
  461 +
  462 +char temp_value=0x90;//0x95
  463 +void LCD_Init_GC9305(kal_uint32 bkground, void **buf_addr)
  464 +{
  465 + kal_uint16 i,j;
  466 +
  467 + SET_LCD_CTRL_RESET_PIN;//set reset pin high
  468 + Delayms(120);
  469 + CLEAR_LCD_CTRL_RESET_PIN;//set reset pin low
  470 + Delayms(50);
  471 + SET_LCD_CTRL_RESET_PIN;//set reset pin high
  472 + Delayms(150);
  473 +
  474 + //--------------------------------display control setting----------------------------------------//
  475 + LCD_CtrlWrite_GC9305(0xfe);
  476 + LCD_CtrlWrite_GC9305(0xef);
  477 + LCD_CtrlWrite_GC9305(0x36);
  478 + LCD_DataWrite_GC9305(0x48);
  479 + LCD_CtrlWrite_GC9305(0x3a);
  480 + LCD_DataWrite_GC9305(0x05);
  481 + LCD_CtrlWrite_GC9305(0x35);
  482 + LCD_DataWrite_GC9305(0x00);
  483 + LCD_CtrlWrite_GC9305(0x44);
  484 + LCD_DataWrite_GC9305(0x00);
  485 + LCD_DataWrite_GC9305(0x0a);
  486 + //---------------------------------end display control setting--------------------------------//
  487 + //------------------------------Power Control Registers Initial------------------------------//
  488 + LCD_CtrlWrite_GC9305(0xa4);
  489 + LCD_DataWrite_GC9305(0x44);
  490 + LCD_DataWrite_GC9305(0x44);
  491 + LCD_CtrlWrite_GC9305(0xa5);
  492 + LCD_DataWrite_GC9305(0x42);
  493 + LCD_DataWrite_GC9305(0x42);
  494 + LCD_CtrlWrite_GC9305(0xaa);
  495 + LCD_DataWrite_GC9305(0x88);
  496 + LCD_DataWrite_GC9305(0x88);
  497 + LCD_CtrlWrite_GC9305(0xe8);
  498 + LCD_DataWrite_GC9305(0x11);
  499 + LCD_DataWrite_GC9305(0x0b);
  500 + LCD_CtrlWrite_GC9305(0xe3);
  501 + LCD_DataWrite_GC9305(0x01);
  502 + LCD_DataWrite_GC9305(0x10);
  503 + LCD_CtrlWrite_GC9305(0xff);
  504 + LCD_DataWrite_GC9305(0x61);
  505 + LCD_CtrlWrite_GC9305(0xAC);
  506 + LCD_DataWrite_GC9305(0x00);
  507 + LCD_CtrlWrite_GC9305(0xAd);
  508 + LCD_DataWrite_GC9305(0x33);
  509 + LCD_CtrlWrite_GC9305(0xAe);
  510 + LCD_DataWrite_GC9305(0x2b);
  511 + LCD_CtrlWrite_GC9305(0xAf);
  512 + LCD_DataWrite_GC9305(0x55);
  513 + //LCD_CtrlWrite_GC9305(0xe1);
  514 + //LCD_DataWrite_GC9305(0x10);
  515 + //LCD_DataWrite_GC9305(0x0a);
  516 + //-------------------------------display window 240X320------------------------------------//
  517 + LCD_CtrlWrite_GC9305(0x2a);
  518 + LCD_DataWrite_GC9305(0x00);
  519 + LCD_DataWrite_GC9305(0x00);
  520 + LCD_DataWrite_GC9305(0x00);
  521 + LCD_DataWrite_GC9305(0xef);
  522 + LCD_CtrlWrite_GC9305(0x2b);
  523 + LCD_DataWrite_GC9305(0x00);
  524 + LCD_DataWrite_GC9305(0x00);
  525 + LCD_DataWrite_GC9305(0x01);
  526 + LCD_DataWrite_GC9305(0x3f);
  527 + LCD_CtrlWrite_GC9305(0x2c);
  528 + //----------------------------------end display window ----------------------------------------//
  529 + //--------------------------------------gamma setting-------------------------------------------//
  530 + LCD_CtrlWrite_GC9305(0xf0);
  531 + LCD_DataWrite_GC9305(0x02);
  532 + LCD_DataWrite_GC9305(0x00);
  533 + LCD_DataWrite_GC9305(0x00);
  534 + LCD_DataWrite_GC9305(0x05);
  535 + LCD_DataWrite_GC9305(0x09);
  536 + LCD_DataWrite_GC9305(0x0F);
  537 + LCD_CtrlWrite_GC9305(0xf1);
  538 + LCD_DataWrite_GC9305(0x01);
  539 + LCD_DataWrite_GC9305(0x02);
  540 + LCD_DataWrite_GC9305(0x00);
  541 + LCD_DataWrite_GC9305(0x20);
  542 + LCD_DataWrite_GC9305(0x32);
  543 + LCD_DataWrite_GC9305(0x12);
  544 + LCD_CtrlWrite_GC9305(0xf2);
  545 + LCD_DataWrite_GC9305(0x10);
  546 + LCD_DataWrite_GC9305(0x0b);
  547 + LCD_DataWrite_GC9305(0x2e);
  548 + LCD_DataWrite_GC9305(0x06);
  549 + LCD_DataWrite_GC9305(0x06);
  550 + LCD_DataWrite_GC9305(0x3d);
  551 + LCD_CtrlWrite_GC9305(0xf3);
  552 + LCD_DataWrite_GC9305(0x12);
  553 + LCD_DataWrite_GC9305(0x09);
  554 + LCD_DataWrite_GC9305(0x5a);
  555 + LCD_DataWrite_GC9305(0x01);
  556 + LCD_DataWrite_GC9305(0x01);
  557 + LCD_DataWrite_GC9305(0x66);
  558 + LCD_CtrlWrite_GC9305(0xf4);
  559 + LCD_DataWrite_GC9305(0x0f);
  560 + LCD_DataWrite_GC9305(0x1b);
  561 + LCD_DataWrite_GC9305(0x1a);
  562 + LCD_DataWrite_GC9305(0xf);
  563 + LCD_DataWrite_GC9305(0x11);
  564 + LCD_DataWrite_GC9305(0x0F);
  565 + LCD_CtrlWrite_GC9305(0xf5);
  566 + LCD_DataWrite_GC9305(0x04);
  567 + LCD_DataWrite_GC9305(0x10);
  568 + LCD_DataWrite_GC9305(0x10);
  569 + LCD_DataWrite_GC9305(0x32);
  570 + LCD_DataWrite_GC9305(0x31);
  571 + LCD_DataWrite_GC9305(0x0F);
  572 + //------------------------------------end gamma setting------------------------------------------//
  573 + LCD_CtrlWrite_GC9305(0x11);
  574 + Delayms(120);
  575 + LCD_CtrlWrite_GC9305(0x29);
  576 + LCD_CtrlWrite_GC9305(0x2c);
  577 + //e9开双通道
  578 + LCD_CtrlWrite_GC9305(0xe9);
  579 + LCD_DataWrite_GC9305(0x08);
  580 +
  581 +
  582 +
  583 +}
  584 +
  585 +
  586 +void LCD_PWRON_GC9305(kal_bool on)
  587 +{
  588 + if(on)
  589 + {
  590 + //kal_prompt_trace(MOD_ENG,"sleep out");
  591 + LCD_ExitSleep_GC9305();
  592 + }
  593 + else
  594 + {
  595 + //kal_prompt_trace(MOD_ENG,"sleep in");
  596 + LCD_EnterSleep_GC9305();
  597 + }
  598 +}
  599 +
  600 +
  601 +void LCD_SetContrast_GC9305(kal_uint8 level)
  602 +{
  603 +}
  604 +
  605 +void LCD_ON_GC9305(kal_bool on)
  606 +{
  607 + if (on)
  608 + {
  609 + //kal_prompt_trace(MOD_ENG,"screen on");
  610 + LCD_ExitSleep_GC9305();
  611 + }
  612 + else
  613 + {
  614 + //kal_prompt_trace(MOD_ENG,"screen off");
  615 + LCD_EnterSleep_GC9305();
  616 + }
  617 +}
  618 +void LCD_BlockWrite_GC9305(kal_uint16 startx,kal_uint16 starty,kal_uint16 endx,kal_uint16 endy)
  619 +{
  620 + //startx = 2;
  621 + //starty = 2;
  622 + //endx = LCD_WIDTH+1;
  623 + //endy = LCD_HEIGHT+1; //in LQT mode and update permitted
  624 +
  625 +#ifdef __GC9305_DEBUG_TRACE__
  626 + //kal_prompt_trace(MOD_ENG,"LCD block write");
  627 +#endif
  628 + #if defined(__RF_DESENSE_TEST__) && defined(__FM_DESENSE_COPY_NO_LCM_UPDATE_)
  629 + // under this test, we will not write any command to LCM.
  630 + return;
  631 + #endif
  632 + ASSERT(lcd_assert_fail==KAL_FALSE);
  633 + lcd_assert_fail = KAL_TRUE;
  634 + #ifdef LQT_SUPPORT
  635 + if(!lcd_update_permission&&!(lcd_at_mode==LCD_AT_RELEASE_MODE))
  636 + {
  637 + lcd_assert_fail = KAL_FALSE;
  638 + return;//in LQT mode but not update permitted
  639 + }
  640 + if(lcd_update_permission&&!(lcd_at_mode==LCD_AT_RELEASE_MODE))
  641 + {
  642 + startx = 0;
  643 + starty = 0;
  644 + endx = LCD_WIDTH-1;
  645 + endy = LCD_HEIGHT-1 ; //in LQT mode and update permitted
  646 + }
  647 + #endif /*LQT_SUPPORT*/
  648 +
  649 +#if (defined(LCD_CMD_DMA_MODE))
  650 +
  651 + SET_LCD_CMD_PARAMETER(0,LCD_CMD,0x002A); //Set_column_address(2Ah)
  652 + SET_LCD_CMD_PARAMETER(1,LCD_DATA,(startx&0xFF00)>>8);
  653 + SET_LCD_CMD_PARAMETER(2,LCD_DATA,startx&0x00FF);
  654 + SET_LCD_CMD_PARAMETER(3,LCD_DATA,(endx&0xFF00)>>8);
  655 + SET_LCD_CMD_PARAMETER(4,LCD_DATA,endx&0x00FF);
  656 +
  657 + SET_LCD_CMD_PARAMETER(5,LCD_CMD,0x002B); //Set_page_address(2Bh)
  658 + SET_LCD_CMD_PARAMETER(6,LCD_DATA,(starty&0xFF00)>>8);
  659 + SET_LCD_CMD_PARAMETER(7,LCD_DATA,starty&0x00FF);
  660 + SET_LCD_CMD_PARAMETER(8,LCD_DATA,(endy&0xFF00)>>8);
  661 + SET_LCD_CMD_PARAMETER(9,LCD_DATA,endy&0x00FF);
  662 +
  663 + SET_LCD_CMD_PARAMETER(10,LCD_CMD,0x002C); //Write_memory_start(2Ch)
  664 +
  665 + //SET_LCD_PARALLEL_IF_TIMING(0,0,0,1,2,2,2,6,0); //don't care write cycle(write register) 100ns
  666 + //SET_LCD_CMD_PARAMETER(11,LCD_CMD,0x0029); //Write_memory_start(2Ch)
  667 + SET_LCD_ROI_CTRL_NUMBER_OF_CMD(11);
  668 + ENABLE_LCD_TRANSFER_COMPLETE_INT;
  669 + ENABLE_LCD_ROI_CTRL_CMD_FIRST;//ENABLE_LCD_ROI_CTRL_CMD_FIRST;
  670 + //while(LCD_IS_RUNNING);
  671 + START_LCD_TRANSFER;
  672 +
  673 +#else
  674 + //ENABLE_LCD_SERIAL0_CS;
  675 + LCD_CtrlWrite_GC9305(0x002a);
  676 + LCD_DataWrite_GC9305((startx&0xff00)>>8);//start x
  677 + LCD_DataWrite_GC9305(startx&0x00ff);
  678 +
  679 + LCD_DataWrite_GC9305((endx&0xff00)>>8);//end x
  680 + LCD_DataWrite_GC9305(endx&0x00ff);
  681 +
  682 + LCD_CtrlWrite_GC9305(0x002b);
  683 + LCD_DataWrite_GC9305((starty&0xff00)>>8);//start x
  684 + LCD_DataWrite_GC9305(starty&0x00ff);
  685 +
  686 + LCD_DataWrite_GC9305((endy&0xff00)>>8);//end x
  687 + LCD_DataWrite_GC9305(endy&0x00ff);
  688 +
  689 + LCD_CtrlWrite_GC9305(0x002c);//transfor begin
  690 +
  691 + ENABLE_LCD_TRANSFER_COMPLETE_INT;
  692 + DISABLE_LCD_ROI_CTRL_CMD_FIRST;//ENABLE_LCD_ROI_CTRL_CMD_FIRST;
  693 + START_LCD_TRANSFER;
  694 + // DISABLE_LCD_SERIAL0_CS;
  695 +#endif
  696 +
  697 + lcd_assert_fail = KAL_FALSE;
  698 +
  699 +}
  700 +
  701 +void LCD_Size_GC9305(kal_uint16 *out_LCD_width,kal_uint16 *out_LCD_height)
  702 +{
  703 + *out_LCD_width = LCD_WIDTH;
  704 + *out_LCD_height = LCD_HEIGHT;
  705 +}
  706 +
  707 +/*Engineering mode*/
  708 +kal_uint8 LCD_GetParm_GC9305(lcd_func_type type)
  709 +{
  710 + switch(type)
  711 + {
  712 + case lcd_Bais_func:
  713 + return 1;
  714 + case lcd_Contrast_func:
  715 + return 1;
  716 + case lcd_LineRate_func:
  717 + return 1;
  718 + case lcd_Temperature_Compensation_func:
  719 + return 1;
  720 + default:
  721 + ASSERT(0);
  722 + return 100;
  723 + }
  724 +}
  725 +
  726 +void LCD_SetBias_GC9305(kal_uint8 *bias)
  727 +{
  728 +}
  729 +
  730 +void LCD_Contrast_GC9305(kal_uint8 *contrast)
  731 +{
  732 +}
  733 +
  734 +void LCD_LineRate_GC9305(kal_uint8 *linerate)
  735 +{
  736 +}
  737 +
  738 +void LCD_Temp_Compensate_GC9305(kal_uint8 *compensate)
  739 +{
  740 +}
  741 +
  742 +void LCD_Set_Scan_Direction_GC9305(kal_uint8 rotate_value)
  743 +{
  744 +
  745 +} /* LCD_Set_Scan_Direction_TA7601() */
  746 +
  747 +
  748 +#ifdef LQT_SUPPORT/*Please don't remove LQT code segments*/
  749 +/*************************************************************************
  750 +* FUNCTION
  751 +* LCD_gamma_test() and LCD_flicker_test()
  752 +*
  753 +* DESCRIPTION
  754 +* Generating test pattern by AT commands.
  755 +*
  756 +* PARAMETERS
  757 +* level, color
  758 +*
  759 +* RETURNS
  760 +* None
  761 +*
  762 +* GLOBALS AFFECTED
  763 +*
  764 +*************************************************************************/
  765 +void LCD_gamma_test_GC9305(kal_uint8 level, kal_uint8 color)
  766 +{
  767 + kal_uint16 LCD_x;
  768 + kal_uint16 LCD_y;
  769 + kal_uint16 r_color,g_color,b_color,w_color;
  770 + kal_uint32 lcd_layer0_buffer;
  771 +
  772 +
  773 +
  774 + lcd_layer0_buffer=REG_LCD_LAYER0_BUFF_ADDR;
  775 + r_color=(level>>1)<<11; /* transfer to RGB565 */
  776 + g_color=level<<5;
  777 + b_color=level>>1;
  778 + w_color=(r_color|g_color|b_color);
  779 + for(LCD_y=0;LCD_y<LCD_HEIGHT;LCD_y++)
  780 + {
  781 + for(LCD_x=0;LCD_x<LCD_WIDTH/2;LCD_x++)
  782 + {
  783 + switch(color)
  784 + {
  785 + case 0:
  786 + *((kal_uint32 *)lcd_layer0_buffer+LCD_y*(LCD_WIDTH/2)+LCD_x)= ((w_color<<16)|w_color);
  787 + break;
  788 + case 1:
  789 + *((kal_uint32 *)lcd_layer0_buffer+LCD_y*(LCD_WIDTH/2)+LCD_x)= ((r_color<<16)|r_color);
  790 + break;
  791 + case 2:
  792 + *((kal_uint32 *)lcd_layer0_buffer+LCD_y*(LCD_WIDTH/2)+LCD_x)= ((g_color<<16)|g_color);
  793 + break;
  794 + case 3:
  795 + *((kal_uint32 *)lcd_layer0_buffer+LCD_y*(LCD_WIDTH/2)+LCD_x)= ((b_color<<16)|b_color);
  796 + break;
  797 +
  798 + default:
  799 + ASSERT(0);
  800 + }
  801 + }
  802 + }
  803 +}
  804 +
  805 +void LCD_flicker_test_GC9305(kal_uint8 level)
  806 +{
  807 + kal_uint16 LCD_x,LCD_y;
  808 +
  809 + LCD_CtrlWrite_GC9305(0x002a);
  810 + LCD_DataWrite_GC9305((0&0xff00)>>8);//start x
  811 + LCD_DataWrite_GC9305(0&0x00ff);
  812 + LCD_DataWrite_GC9305(((480-1)&0xff00)>>8);//end x
  813 + LCD_DataWrite_GC9305((480-1)&0x00ff);
  814 +
  815 + LCD_CtrlWrite_GC9305(0x002b);
  816 + LCD_DataWrite_GC9305((0&0xff00)>>8);//start y
  817 + LCD_DataWrite_GC9305(0&0x00ff);
  818 + LCD_DataWrite_GC9305(((800-1)&0xff00)>>8);//end y
  819 + LCD_DataWrite_GC9305((800-1)&0x00ff);
  820 +
  821 + LCD_CtrlWrite_GC9305(0x002c);//transfor begin
  822 +
  823 +
  824 + for(LCD_y=0;LCD_y<=800-1;LCD_y++)
  825 + {
  826 +
  827 + if(LCD_y&0x2)
  828 + {
  829 + for(LCD_x=0;LCD_x<=480-1;LCD_x+=1)
  830 + {
  831 + *(volatile kal_uint32 *) MAIN_LCD_DATA_ADDR= (0x0003FFFF);
  832 + //Delayms(1);
  833 + }
  834 + }
  835 + else
  836 + {
  837 + for(LCD_x=0;LCD_x<=480-1;LCD_x+=1)
  838 + {
  839 + *(volatile kal_uint32 *) MAIN_LCD_DATA_ADDR= (0x00000000);
  840 + //Delayms(1);
  841 + }
  842 + }
  843 + }
  844 + //Delayms(5000);
  845 +}
  846 +
  847 +void LCD_Frame_Pixel_Test_GC9305(void)
  848 +{
  849 +
  850 + kal_uint16 LCD_x,LCD_y;
  851 +
  852 + LCD_CtrlWrite_GC9305(0x002a);
  853 + LCD_DataWrite_GC9305((0&0xff00)>>8);//start x
  854 + LCD_DataWrite_GC9305(0&0x00ff);
  855 + LCD_DataWrite_GC9305(((480-1)&0xff00)>>8);//end x
  856 + LCD_DataWrite_GC9305((480-1)&0x00ff);
  857 +
  858 + LCD_CtrlWrite_GC9305(0x002b);
  859 + LCD_DataWrite_GC9305((0&0xff00)>>8);//start y
  860 + LCD_DataWrite_GC9305(0&0x00ff);
  861 + LCD_DataWrite_GC9305(((800-1)&0xff00)>>8);//end y
  862 + LCD_DataWrite_GC9305((800-1)&0x00ff);
  863 +
  864 + LCD_CtrlWrite_GC9305(0x002c);//transfor begin
  865 +
  866 +#if 0
  867 +/* under construction !*/
  868 +/* under construction !*/
  869 +/* under construction !*/
  870 +/* under construction !*/
  871 +/* under construction !*/
  872 +/* under construction !*/
  873 +/* under construction !*/
  874 +/* under construction !*/
  875 +/* under construction !*/
  876 +/* under construction !*/
  877 +#else
  878 +
  879 + for(LCD_y=0;LCD_y<=800-1;LCD_y++)
  880 + {
  881 + for(LCD_x=0;LCD_x<=480-1;LCD_x+=1)
  882 + {
  883 +
  884 + if(0==LCD_y ||(800-1)==LCD_y)
  885 + {
  886 + *(volatile kal_uint32 *) MAIN_LCD_DATA_ADDR= (0x0003FFFF);
  887 +
  888 + }
  889 + else if(0== LCD_x)
  890 + {
  891 + *(volatile kal_uint32 *) MAIN_LCD_DATA_ADDR= (0x0003FFFF);
  892 + }
  893 + else if(480-2==LCD_x)
  894 + {
  895 + *(volatile kal_uint32 *) MAIN_LCD_DATA_ADDR= (0x0003FFFF);
  896 + }
  897 + else
  898 + {
  899 + *(volatile kal_uint32 *) MAIN_LCD_DATA_ADDR= (0x00000000);
  900 + }
  901 + }
  902 + }
  903 +#endif
  904 +}
  905 +
  906 +void LCD_CS_Test_GC9305(kal_uint16 cs,kal_uint16 bgr,kal_uint16 mx)
  907 +{
  908 +
  909 +#ifdef __GC9305_DEBUG_TRACE__
  910 + kal_prompt_trace(MOD_ENG,"LCD_CS_Test cs=%d,bgr=%d,mx=%d",cs,bgr,mx);
  911 +#endif
  912 +
  913 + if(0==cs)
  914 + {
  915 + if(0==bgr && 0==mx)
  916 + {
  917 + LCD_CtrlWrite_GC9305(0x0036);
  918 + LCD_DataWrite_GC9305(0x00);
  919 + }
  920 + else if(1==bgr && 0==mx)
  921 + {
  922 + LCD_CtrlWrite_GC9305(0x0036);
  923 + LCD_DataWrite_GC9305(0x08);
  924 + }
  925 + else if(1==bgr && 1==mx)
  926 + {
  927 + LCD_CtrlWrite_GC9305(0x0036);
  928 + LCD_DataWrite_GC9305(0x48);
  929 + }
  930 + }
  931 + else
  932 + { //cs1
  933 + //re define
  934 + #define MAIN_LCD_CMD1_ADDR LCD_PARALLEL1_A0_LOW_ADDR
  935 + #define MAIN_LCD_DATA1_ADDR LCD_PARALLEL1_A0_HIGH_ADDR
  936 +
  937 +
  938 + #define LCD_CtrlWrite1_GC9305(_data) \
  939 + {\
  940 + *(volatile kal_uint16 *) MAIN_LCD_CMD1_ADDR= (_data);\
  941 + }\
  942 +
  943 + #define LCD_DataWrite1_GC9305(_data) \
  944 + {\
  945 + *(volatile kal_uint16 *) MAIN_LCD_DATA1_ADDR= (_data);\
  946 + }
  947 + // code
  948 + if(0==bgr && 0==mx)
  949 + {
  950 + LCD_CtrlWrite1_GC9305(0x0036);
  951 + LCD_DataWrite1_GC9305(0x00);
  952 + }
  953 + else if(1==bgr && 1==mx)
  954 + {
  955 + LCD_CtrlWrite1_GC9305(0x0036);
  956 + LCD_DataWrite1_GC9305(0x48);
  957 + }
  958 +
  959 + }
  960 +}
  961 +
  962 +
  963 +static void display_RGBbar_GC9305(void)
  964 +{
  965 + kal_uint16 LCD_x,LCD_y,n,r;
  966 +#ifdef __GC9305_DEBUG_TRACE__
  967 + kal_prompt_trace(MOD_ENG,"GC9305 display_RGBbar");
  968 +#endif
  969 + #define GC9305_LCD_HEIGHT 800
  970 + #define GC9305_LCD_WIDTH 480
  971 +
  972 +
  973 + LCD_CtrlWrite_GC9305(0x002a);
  974 + LCD_DataWrite_GC9305((0&0xff00)>>8);//start x
  975 + LCD_DataWrite_GC9305(0&0x00ff);
  976 + LCD_DataWrite_GC9305(((GC9305_LCD_WIDTH-1)&0xff00)>>8);//end x
  977 + LCD_DataWrite_GC9305((GC9305_LCD_WIDTH-1)&0x00ff);
  978 +
  979 + LCD_CtrlWrite_GC9305(0x002b);
  980 + LCD_DataWrite_GC9305((0&0xff00)>>8);//start y
  981 + LCD_DataWrite_GC9305(0&0x00ff);
  982 + LCD_DataWrite_GC9305(((GC9305_LCD_HEIGHT-1)&0xff00)>>8);//end y
  983 + LCD_DataWrite_GC9305((GC9305_LCD_HEIGHT-1)&0x00ff);
  984 +
  985 + LCD_CtrlWrite_GC9305(0x002c);//transfor begin
  986 +
  987 +#if 0
  988 +/* under construction !*/
  989 +/* under construction !*/
  990 +/* under construction !*/
  991 +/* under construction !*/
  992 +/* under construction !*/
  993 +/* under construction !*/
  994 +/* under construction !*/
  995 +/* under construction !*/
  996 +/* under construction !*/
  997 +/* under construction !*/
  998 +/* under construction !*/
  999 +/* under construction !*/
  1000 +#endif
  1001 + for(LCD_y=0;LCD_y<=GC9305_LCD_HEIGHT-1;LCD_y++)
  1002 + {
  1003 + for(LCD_x=0;LCD_x<=GC9305_LCD_WIDTH-1;LCD_x+=1)
  1004 + {
  1005 + if(LCD_y<=((GC9305_LCD_HEIGHT-1)/3))//R
  1006 + {
  1007 + *(volatile kal_uint32 *) MAIN_LCD_DATA_ADDR= (0x0003F000);
  1008 + //Delayms(1);
  1009 + }
  1010 + else if(LCD_y>=((GC9305_LCD_HEIGHT-1)/3*2))//B
  1011 + {
  1012 + *(volatile kal_uint32 *) MAIN_LCD_DATA_ADDR= (0x0000003F) ;
  1013 + //Delayms(1);
  1014 + }
  1015 + else//G
  1016 + {
  1017 + *(volatile kal_uint32 *) MAIN_LCD_DATA_ADDR= (0x00000FC0);
  1018 + //Delayms(1);
  1019 + }
  1020 + }
  1021 + }
  1022 + //Delayms(500);
  1023 +
  1024 +}
  1025 +
  1026 +#endif/*LQT_SUPPORT*/
  1027 +LCM_IOCTRL_STATUS_ENUM
  1028 +LCD_IOCTRL_GC9305(LCM_IOCTRL_ID_ENUM ID, void* Parameters)
  1029 +{
  1030 + switch (ID)
  1031 + {
  1032 + case LCM_IOCTRL_QUERY__FRAME_RATE:
  1033 + *((unsigned int *)Parameters) = 66.38;
  1034 + return LCM_IOCTRL_OK;
  1035 +
  1036 + case LCM_IOCTRL_SET__FRAME_RATE:
  1037 +
  1038 + return LCM_IOCTRL_NOT_SUPPORT;
  1039 +
  1040 +
  1041 + case LCM_IOCTRL_QUERY__FRAME_MARKER:
  1042 +
  1043 + return LCM_IOCTRL_NOT_SUPPORT;
  1044 +
  1045 +
  1046 + case LCM_IOCTRL_SET__FRAME_MARKER:
  1047 +
  1048 + return LCM_IOCTRL_NOT_SUPPORT;
  1049 +
  1050 + //Fine Tue the FRM_Marker to meet all scenarios tearing free. MUST set command immediately
  1051 + //LCD_CtrlWrite_GC9305(0x0044);//frame rate control
  1052 + //LCD_DataWrite_GC9305(((*((unsigned int *)Parameters)+ back_potch)&0xFF00)>>8);//scanline high byte
  1053 + //LCD_DataWrite_GC9305((*((unsigned int *)Parameters)+ back_potch)&0xFF);//scanline low byte
  1054 +
  1055 + /*
  1056 + //make sure it is the same as LCD_Init_GC9305
  1057 + LCD_CtrlWrite_GC9305(0x0044); //set_tear_scanline
  1058 + LCD_DataWrite_GC9305(((*((unsigned int *)Parameters)+ back_potch)&0xFF00)>>8);////TEP[8]
  1059 + LCD_DataWrite_GC9305((*((unsigned int *)Parameters)+ back_potch)&0xFF);//TEP[7:0]
  1060 +
  1061 + return LCM_IOCTRL_OK;
  1062 + */
  1063 +
  1064 + break;
  1065 +
  1066 +
  1067 + case LCM_IOCTRL_QUERY__SUPPORT_H_V_SIGNAL_FUNC:
  1068 + case LCM_IOCTRL_QUERY__SUPPORT_V_PULSE_WIDTH:
  1069 + case LCM_IOCTRL_QUERY__SUPPORT_H_PULSE_WIDTH:
  1070 + return LCM_IOCTRL_NOT_SUPPORT;
  1071 +
  1072 + case LCM_IOCTRL_QUERY__BACK_PORCH:
  1073 + *((unsigned int *)Parameters) = 4;
  1074 + return LCM_IOCTRL_OK;
  1075 +
  1076 + case LCM_IOCTRL_QUERY__FRONT_PORCH:
  1077 + *((unsigned int *)Parameters) = 4;
  1078 + return LCM_IOCTRL_OK;
  1079 +
  1080 + case LCM_IOCTRL_SET__BACK_PORCH:
  1081 + return LCM_IOCTRL_NOT_SUPPORT;
  1082 +
  1083 + case LCM_IOCTRL_SET__FRONT_PORCH:
  1084 +
  1085 + return LCM_IOCTRL_NOT_SUPPORT;
  1086 +
  1087 + case LCM_IOCTRL_QUERY__TE_EDGE_ATTRIB:
  1088 + //LCM_TE_ATTRIB_ENUM
  1089 + *((unsigned int *)Parameters) = LCM_TE_FAILING_EDGE;
  1090 + return LCM_IOCTRL_OK;
  1091 +
  1092 + case LCM_IOCTRL_QUERY__SUPPORT_READBACK_FUNC:
  1093 + return LCM_IOCTRL_NOT_SUPPORT;
  1094 +
  1095 + case LCM_IOCTRL_QUERY__SCANLINE_REG:
  1096 + return LCM_IOCTRL_NOT_SUPPORT;
  1097 +
  1098 + case LCM_IOCTRL_QUERY__IF_CS_NUMBER:
  1099 + //Return the LCM is ocupied which CS.
  1100 + *(kal_uint32*) (Parameters) = LCD_IF_PARALLEL_0;
  1101 + return LCM_IOCTRL_OK;
  1102 +
  1103 +
  1104 +
  1105 + case LCM_IOCTRL_QUERY__SYNC_MODE:
  1106 +
  1107 + //Return correct value based on the mode you set in lcd_init_r61509u(~)
  1108 +
  1109 + //If you set TE to be VH-Sync mode in lcd_init_r61509u(~)<LCD_CtrlWrite_ILI9481(0x35); LCD_DataWrite_ILI9481(0x01);>
  1110 + //*(kal_uint32*) (Parameters) = LCM_TE_VHSYNC_MODE;
  1111 + //return LCM_IOCTRL_OK;
  1112 +
  1113 + //If you set TE to be V-Sync mode in lcd_init_r61509u(~)<LCD_CtrlWrite_ILI9481(0x35); LCD_DataWrite_ILI9481(0x00);>
  1114 + *(kal_uint32*) (Parameters) = LCM_TE_VSYNC_MODE;
  1115 + return LCM_IOCTRL_OK;
  1116 +
  1117 + case LCM_IOCTRL_QUERY__FLIP_MIRROR:
  1118 + return LCM_IOCTRL_NOT_SUPPORT;
  1119 +
  1120 + case LCM_IOCTRL_QUERY__ROTATION:
  1121 + return LCM_IOCTRL_OK;
  1122 + case LCM_IOCTRL_QUERY__LCM_WIDTH:
  1123 + *(kal_uint32*) (Parameters) = 320;
  1124 + return LCM_IOCTRL_OK;
  1125 +
  1126 + case LCM_IOCTRL_QUERY__LCM_HEIGHT:
  1127 + *(kal_uint32*) (Parameters) = 480;
  1128 + return LCM_IOCTRL_OK;
  1129 +
  1130 + case LCM_IOCTRL_QUERY__LCD_PPI:
  1131 + *((kal_uint32*)Parameters) = LCM_DPI;
  1132 + return LCM_IOCTRL_OK;
  1133 +
  1134 + default:
  1135 + return LCM_IOCTRL_NOT_SUPPORT;
  1136 + }
  1137 +}
  1138 +
  1139 +#ifdef COMBO_LCM_ID_AUTO_DETECT
  1140 +kal_bool LCM_ID_check_GC9305()
  1141 +{
  1142 +#if 1
  1143 + volatile kal_uint16 read_data1,read_data2;
  1144 + kal_uint16 CheckDrvId;
  1145 +
  1146 + DISABLE_LCD_SERIAL_IF_HW_CS;//disable hw cs function
  1147 + ENABLE_LCD_SERIAL0_CS;//cs low
  1148 +
  1149 + *(volatile kal_uint8 *) MAIN_LCD_CMD_ADDR = 0x04;
  1150 +
  1151 + SET_LCD_SERIAL0_IF_SIZE(LCD_SCNF_IF_WIDTH_9);
  1152 + Delayms(1);
  1153 + read_data1 = *(volatile kal_uint16 *)MAIN_LCD_DATA_ADDR; //
  1154 + Delayms(1);
  1155 + SET_LCD_SERIAL0_IF_SIZE(LCD_SCNF_IF_WIDTH_8);
  1156 + Delayms(1);
  1157 + read_data1 = *(volatile kal_uint8 *)MAIN_LCD_DATA_ADDR; //
  1158 + Delayms(1);
  1159 + read_data2 = *(volatile kal_uint8 *)MAIN_LCD_DATA_ADDR; //
  1160 + Delayms(1);
  1161 +
  1162 + DISABLE_LCD_SERIAL0_CS;//cs low
  1163 + ENABLE_LCD_SERIAL_IF_HW_CS;//disable hw cs function
  1164 +
  1165 + CheckDrvId = (read_data1 <<8)|read_data2;
  1166 +
  1167 + if (CheckDrvId == 0x9305)
  1168 + return KAL_TRUE;
  1169 + else
  1170 + return KAL_FALSE;
  1171 +
  1172 +#else
  1173 + volatile kal_uint8 read_data2,read_data3,read_data4,read_data5;
  1174 + volatile kal_uint16 read_data1;
  1175 + kal_uint16 CheckDrvId;
  1176 + kal_uint8 id_index = 0x04;
  1177 + DCL_HANDLE gpio_handle;
  1178 +
  1179 +
  1180 +
  1181 +#define SERIVEL_LCM_CS_GPIO 46
  1182 +
  1183 + gpio_handle = DclGPIO_Open(DCL_GPIO, SERIVEL_LCM_CS_GPIO);
  1184 + DclGPIO_Control(gpio_handle, GPIO_CMD_SET_MODE_0, 0);
  1185 + DclGPIO_Close(gpio_handle);
  1186 +
  1187 + GPIO_ModeSetup(SERIVEL_LCM_CS_GPIO, 0);
  1188 + GPIO_InitIO(1, SERIVEL_LCM_CS_GPIO);
  1189 + GPIO_WriteIO(0, SERIVEL_LCM_CS_GPIO);
  1190 + /******此处为了手动将CS拉低，假设使用GPIO46作为CS线********/
  1191 +
  1192 +
  1193 + /******选择SDA的Input source********/
  1194 + REG_LCD_SIF_PAD_SEL_REG = 0x00000000; //0x00020000
  1195 + /******选择SDA的Input source********/
  1196 +
  1197 + while (LCD_IS_RUNNING);
  1198 + *(volatile kal_uint8 *) MAIN_LCD_CMD_ADDR = 0x04;// id_index;
  1199 + /******因为ST7735S反馈第一个bit为dummy bit，因此切换interface的width为9，且定义read_data1为kal_uint16，将dummy bit读回来********/
  1200 + SET_LCD_SERIAL0_IF_SIZE(LCD_SCNF_IF_WIDTH_9);
  1201 + Delayms(1);
  1202 + read_data1 = *(volatile kal_uint16 *)MAIN_LCD_DATA_ADDR; //
  1203 + Delayms(1);
  1204 + /******因为ST7735S反馈第一个bit为dummy bit，因此切换interface的width为9，且定义read_data1为kal_uint16，将dummy bit读回来********/
  1205 + /******之后ST7735S反馈的ID都是8bit宽度的值，因此，再将interface的width切为8.********/
  1206 + SET_LCD_SERIAL0_IF_SIZE(LCD_SCNF_IF_WIDTH_8);
  1207 + Delayms(1);
  1208 + read_data2 = *(volatile kal_uint8 *)MAIN_LCD_DATA_ADDR;
  1209 + Delayms(1);
  1210 + read_data3 = *(volatile kal_uint8 *)MAIN_LCD_DATA_ADDR;
  1211 + Delayms(1);
  1212 + read_data4 = *(volatile kal_uint8 *)MAIN_LCD_DATA_ADDR;
  1213 +
  1214 + CheckDrvId = (read_data2 <<8)|read_data3;
  1215 + //CheckDrvId = (kal_uint16)(tmp_data >> 8);
  1216 + while (LCD_IS_RUNNING);
  1217 +
  1218 + /******将CS模式切换为HW CS mode********/
  1219 + //GPIO_ModeSetup(SERIVEL_LCM_CS_GPIO, 1);
  1220 + GPIO_ModeSetup(SERIVEL_LCM_CS_GPIO, 1);
  1221 + gpio_handle = DclGPIO_Open(DCL_GPIO, SERIVEL_LCM_CS_GPIO);
  1222 + DclGPIO_Control(gpio_handle, GPIO_CMD_SET_MODE_1, 0);
  1223 + DclGPIO_Close(gpio_handle);
  1224 + /******将CS模式切换为HW CS mode********/
  1225 + if (CheckDrvId == 0x9305)
  1226 + return KAL_TRUE;
  1227 + else
  1228 + return KAL_FALSE;
  1229 +#endif
  1230 +}
  1231 +#endif
  1232 +
  1233 +LCD_Funcs LCD_func_GC9305 = {
  1234 +
  1235 + LCD_Init_GC9305, //lqw
  1236 + LCD_PWRON_GC9305,
  1237 + LCD_SetContrast_GC9305,
  1238 + LCD_ON_GC9305,
  1239 + LCD_BlockWrite_GC9305,
  1240 + LCD_Size_GC9305,
  1241 + LCD_EnterSleep_GC9305,
  1242 + LCD_ExitSleep_GC9305,
  1243 + LCD_Partial_On_GC9305,
  1244 + LCD_Partial_Off_GC9305,
  1245 + LCD_Partial_line_GC9305,
  1246 + /*Engineering mode*/
  1247 + LCD_GetParm_GC9305,
  1248 + LCD_SetBias_GC9305,
  1249 + LCD_Contrast_GC9305,
  1250 + LCD_LineRate_GC9305,
  1251 + LCD_Temp_Compensate_GC9305
  1252 +#ifdef LCM_ROTATE_SUPPORT
  1253 + ,LCD_Set_Scan_Direction_GC9305
  1254 +#endif
  1255 +#ifdef LQT_SUPPORT/*Please don't remove LQT code segments*/
  1256 + ,LCD_gamma_test_GC9305
  1257 + ,LCD_flicker_test_GC9305
  1258 +#endif
  1259 + ,0 // NULL function for SetFrmMarker Function.
  1260 + ,LCD_IOCTRL_GC9305
  1261 +};
  1262 +
  1263 +void LCD_FunConfig_GC9305(void)
  1264 +{
  1265 + MainLCD = &LCD_func_GC9305;
  1266 +}
  1267 +
  1268 +#ifdef __LCM_AT_TEST__ // Add by hesong 0225
  1269 +void at_command_test_lcm(kal_uint32 *d)
  1270 +{
  1271 +#ifdef __GC9305_DEBUG_TRACE__
  1272 + kal_prompt_trace(MOD_ENG,"at_command_test_lcm %d",d[1]);
  1273 +#endif
  1274 + switch(d[1]){
  1275 + case 2:
  1276 + /*LCD-test-002
  1277 + No fricker
  1278 + 确保开机过程和IDLE界面屏不会闪, 可尋求IC vendor協助或
  1279 + 自行調整frame rate/COM_H and COM_L, 參考page "Flicker Test Code"
  1280 + */
  1281 + LCD_flicker_test_GC9305(d[2]);//255/200/160
  1282 + break;
  1283 +
  1284 + case 3:
  1285 + /*LCD-test-003
  1286 + WR toggle with CS1(CS0不toggle)
  1287 + 在Init後,特意去用CS1 Port去更改LCD IC Register(例如Scan direction, Color format...),
  1288 + 確定對CS0上的LCM無影?
  1289 + */
  1290 + LCD_CS_Test_GC9305(d[2],d[3],d[4]);
  1291 +
  1292 + break;
  1293 + case 4:
  1294 + /*LCD-test-004
  1295 + LCD 1-pixel Frame test
  1296 + 最外圍1-pixel?度?的特殊檢?pattern,
  1297 + 檢查可能的IC起始pixel/line傳?方式錯誤,
  1298 + 檢查TFT上的layout?題,可參考page"LCD 1-pixel Frame test coding"
  1299 + */
  1300 + LCD_Frame_Pixel_Test_GC9305();
  1301 + break;
  1302 +
  1303 + case 7:
  1304 + /*LCD-test-007
  1305 + sleep in status OK.
  1306 + 能正确进入sleep状态
  1307 + (若有?流?的?,應?能確認?IC耗??流達到spec.需求)
  1308 + */
  1309 + LCD_EnterSleep_GC9305();
  1310 + break;
  1311 + case 8:
  1312 + /*LCD-test-008
  1313 + Sleep-in with CS/WR toggle
  1314 + lcd 进入睡眠后，用AT Cmd给LCM发命令或数据(非睡眠序列)，
  1315 + 不会导致LCM死机, ,某些LCD IC在进入Sleep-in时只是将Power关掉,
  1316 + 内部逻辑电压依旧可以起作用,所以在sleep-in時设置Mode Register
  1317 + 有可能有作用。因此這?測?可以敘述IC在Sleep-in時是否能接收Command
  1318 + */
  1319 + display_RGBbar_GC9305();
  1320 + break;
  1321 + case 9:
  1322 + /*LCD-test-009
  1323 + sleep out success
  1324 + 能正确退出睡眠状态
  1325 + */
  1326 + LCD_ExitSleep_GC9305();
  1327 +
  1328 + break;
  1329 + case 15:
  1330 + /*LCD-test-015
  1331 + Read GRAM function OK
  1332 + 能正常用AT Command去读GRAM的数据
  1333 + */
  1334 +
  1335 + LCD_Read_GRAM_GC9305(d[2],d[3],d[4],d[5]);
  1336 + break;
  1337 +
  1338 + case 16:
  1339 + /*LCD-test-016
  1340 + Read Register function OK
  1341 + 能讀回正常的Chip ID
  1342 + */
  1343 + LCD_Read_ID_GC9305();
  1344 + break;
  1345 +
  1346 + case 0xFE:
  1347 + LCD_CtrlWrite_GC9305(0x0028);//display off
  1348 +#ifdef __GC9305_DEBUG_TRACE__
  1349 + kal_prompt_trace(MOD_ENG,"display off");
  1350 +#endif
  1351 + break;
  1352 + case 0xFF:
  1353 + LCD_CtrlWrite_GC9305(0x0029);//display on
  1354 +#ifdef __GC9305_DEBUG_TRACE__
  1355 + kal_prompt_trace(MOD_ENG,"display on");
  1356 +#endif
  1357 + break;
  1358 + default:
  1359 +#ifdef __GC9305_DEBUG_TRACE__
  1360 + kal_prompt_trace(MOD_ENG,"woo...default!");
  1361 +#endif
  1362 + break;
  1363 + }
  1364 +}
  1365 +#endif
  1366 +
  1367 +#endif
@@ -158,7 +158,8 @@ extern kal_uint32 back_potch ; @@ -158,7 +158,8 @@ extern kal_uint32 back_potch ;
158 //#define __TOPWELL_HW_LCD_240X320_T326_ST7789S_BASE__ 158 //#define __TOPWELL_HW_LCD_240X320_T326_ST7789S_BASE__
159 159
160 #elif defined(__TOPWELL_T3212_B32_MBR__) 160 #elif defined(__TOPWELL_T3212_B32_MBR__)
161 - #define __TOPWELL_HW_LCD_240X320_T3212_ILI9341V_BASE_CTC__ 161 + //#define __TOPWELL_HW_LCD_240X320_T3212_ILI9341V_BASE_CTC__
  162 + #define __TOPWELL_HW_LCD_240X320_T3212_GC9305_IVO__
162 163
163 #elif defined(__TOPWELL_T3211_C8_TWL__) 164 #elif defined(__TOPWELL_T3211_C8_TWL__)
164 #define __TOPWELL_HW_LCD_240X320_T303_GC9301_YC_CMO__ //temp use 165 #define __TOPWELL_HW_LCD_240X320_T303_GC9301_YC_CMO__ //temp use
@@ -270,8 +271,9 @@ extern kal_uint32 back_potch ; @@ -270,8 +271,9 @@ extern kal_uint32 back_potch ;
270 #define __TOPWELL_HW_LCD_IC_ST7789S__ 271 #define __TOPWELL_HW_LCD_IC_ST7789S__
271 #endif 272 #endif
272 273
273 -#if defined(__TOPWELL_HW_LCD_240X320_T303_ILI9341_WT_CTC__)||defined(__TOPWELL_HW_LCD_240X320_T351_ILI9341_BASE__)||defined(__TOPWELL_HW_LCD_240X320_T326_ILI9341_ZJGD__)||defined(__TOPWELL_HW_LCD_240X320_T3211_ILI9341_JD__)||defined(__TOPWELL_HW_LCD_240X320_T3212_ILI9341V_BASE_CTC__)  
274 - #define __TOPWELL_HW_LCD_IC_ILI9341__ 274 +#if defined(__TOPWELL_HW_LCD_240X320_T303_ILI9341_WT_CTC__)||defined(__TOPWELL_HW_LCD_240X320_T351_ILI9341_BASE__)||defined(__TOPWELL_HW_LCD_240X320_T326_ILI9341_ZJGD__)||defined(__TOPWELL_HW_LCD_240X320_T3211_ILI9341_JD__)||defined(__TOPWELL_HW_LCD_240X320_T3212_ILI9341V_BASE_CTC__)|| defined(__TOPWELL_HW_LCD_240X320_T3212_GC9305_IVO__)
  275 + //#define __TOPWELL_HW_LCD_IC_ILI9341__
  276 + #define __TOPWELL_HW_LCD_IC_GC9305__
275 #endif 277 #endif
276 278
277 #if defined(__TOPWELL_HW_LCD_240X320_T303_GC9301_YC_CMO__)||defined(__TOPWELL_HW_LCD_240X320_T351_GC9301_BASE__)||defined(__TOPWELL_HW_LCD_240X320_T326_GC9301_BASE__) 279 #if defined(__TOPWELL_HW_LCD_240X320_T303_GC9301_YC_CMO__)||defined(__TOPWELL_HW_LCD_240X320_T351_GC9301_BASE__)||defined(__TOPWELL_HW_LCD_240X320_T326_GC9301_BASE__)
@@ -350,7 +352,10 @@ extern kal_uint32 back_potch ; @@ -350,7 +352,10 @@ extern kal_uint32 back_potch ;
350 #endif 352 #endif
351 #if defined(__TOPWELL_HW_LCD_IC_GC9304__) 353 #if defined(__TOPWELL_HW_LCD_IC_GC9304__)
352 GC9304, 354 GC9304,
353 - #endif 355 + #endif
  356 + #if defined(__TOPWELL_HW_LCD_IC_GC9305__)
  357 + GC9305,
  358 + #endif
354 #if defined(__TOPWELL_HW_LCD_IC_ST7775R__) 359 #if defined(__TOPWELL_HW_LCD_IC_ST7775R__)
355 ST7775R, 360 ST7775R,
356 #endif 361 #endif
@@ -387,7 +392,8 @@ extern kal_uint32 back_potch ; @@ -387,7 +392,8 @@ extern kal_uint32 back_potch ;
387 #define SERIAL_LCM_3WIRE_2_DATA_LANE 392 #define SERIAL_LCM_3WIRE_2_DATA_LANE
388 393
389 #else 394 #else
390 -#define SERIAL_LCM_4WIRE_1_DATA_LANE 395 +//#define SERIAL_LCM_4WIRE_1_DATA_LANE
  396 +#define SERIAL_LCM_3WIRE_2_DATA_LANE
391 397
392 #endif 398 #endif
393 399
Please register or login to post a comment